Chrysler Le Baron, Dodge Dynasty, Plymouth Acclaim. Manual — part 102
CAUTION: Pry only at slot as shown (Fig. 30).
Fig. 28 1-2 Shift Rail and Shift Lug
Fig. 29 Remove or Install Large Snap Ring
Fig. 30 Pry Bearing Retainer Plate to Remove
Fig. 31 Bearing Support Plate
Fig. 32 Remove or Install Reverse Idler Gear
Fig. 33 Reverse Idler Gear Assembly
Ä
TRANSAXLE
21 - 13
CLUTCH RELEASE BEARING
INPUT SHAFT OIL SEAL
Fig. 34 Remove or Install Gear Set
Fig. 35 Gear Set
Fig. 1 Remove Retaining E-Clip
Fig. 2 Remove or Install Clutch Release Shaft
Fig. 3 Clutch Release Shaft Components
Fig. 4 Remove or Install Input Shaft Seal Retainer
21 - 14
TRANSAXLE
Ä
REVERSE SHIFT LEVER
SUBASSEMBLY-RECONDITION
TRANSAXLE CASE
Fig. 6 Install New Input Shaft Seal
Fig. 7 Remove or Install Reverse Shift Lever E-Clip
Fig. 8 Reverse Shift Lever Components
Fig. 1 Remove Input Shaft Front Bearing Cup
Fig. 2 Install Input Shaft Front Bearing Cup
Fig. 5 Input Shaft Seal Retainer
Ä
TRANSAXLE
21 - 15
Use Tool C-4660-2A Screw. The screw has a larger
hole in the lower end to fit over the larger oil feeder
nipple (Fig. 5).
INTERMEDIATE SHAFT ASSEMBLY
Intermediate shaft ball bearing seal color:
A-525/A-523/A-543 Black, A-568 Blue.
Fig. 3 Remove or Install Bearing Retaining Strap
Fig. 4 Remove Intermediate Shaft Front Bearing
Fig. 5 Oil Feeder
Fig. 6 Install Intermediate Shaft Front Bearing
Fig. 1 Intermediate Shaft Bearing Snap Ring
Fig. 2 Remove Intermediate Shaft Rear Bearing
21 - 16
TRANSAXLE
Ä
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст