Chrysler Pacifica. Manual — part 826
LIFTGATE SILL SCUFF PLATE
REMOVAL
(1) Using trim stick (C-4755), disengage push pins
attaching liftgate sill scuff plate to liftgate sill.
(2) Remove liftgate sill scuff plate from vehicle
(Fig. 22).
INSTALLATION
(1) Place sill scuff plate in position on vehicle (Fig.
22).
(2) Press sill scuff plate down to engage push pins
to liftgate sill.
QUARTER TRIM PANEL
REMOVAL
(1) Open rear door.
(2) Open liftgate.
(3) Remove rear door sill scuff plate. (Refer to 23 -
BODY/INTERIOR/REAR DOOR SILL SCUFF PLATE -
REMOVAL).
(4) Remove liftgate sill scuff plate. (Refer to 23 -
BODY/INTERIOR/LIFTGATE SILL SCUFF PLATE -
REMOVAL)
(5) Fold the first row seat back down and roll seat
forward.
(6) Fold second row seat back down.
(7) Remove rear floor storage bin. (Refer to 23 -
BODY/INTERIOR/REAR FLOOR STOWAGE BIN -
REMOVAL).
(8) Remove second row seat from vehicle to access
quarter trim panel. (Refer to 23 - BODY/SEATS/
SEAT - REMOVAL).
(9) Remove C-pillar lower seat belt anchor and
D-pillar lower seat belt anchor. (Refer to 8 - ELEC-
TRICAL/RESTRAINTS/SEAT BELT & RETRACTOR
- REMOVAL).
(10) Using a trim stick C-4755 or equivalent, dis-
engage the locking tabs and remove quarter trim
panel bolster cover (speaker grille). (Refer to 8 -
ELECTRICAL/AUDIO/SPEAKER - REMOVAL).
(11) Remove screw attaching tie down ring (Fig.
23).
(12) Using a trim stick C-4755 or equivalent, dis-
engage the locking tabs attaching quarter trim panel
body side panel.
(13) Pull quarter trim panel free enough to reach
behind trim panel to disconnect power outlet connec-
tor and speaker connector.
(14) Remove quarter trim panel from vehicle.
INSTALLATION
(1) Place quarter trim panel into position (Fig. 23).
(2) Reach behind trim panel, connect power outlet
connector and speaker connector.
(3) Set locators pins into position and pressing on
panel to engage the locking tabs attaching quarter
trim panel body side panel.
(4) Install screw attaching tie down ring.
(5) Place quarter trim panel bolster cover (speaker
grille) into position and press on bolster to engage
locking pins. (Refer to 8 - ELECTRICAL/AUDIO/
SPEAKER - INSTALLATION).
(6) Install C-pillar lower seat belt anchor and
D-pillar lower seat belt anchor. (Refer to 8 - ELEC-
TRICAL/RESTRAINTS/SEAT BELT & RETRACTOR
- INSTALLATION).
(7) Install second row seat into vehicle. (Refer to
23 - BODY/SEATS/SEAT - INSTALLATION).
(8) Install rear floor storage bin. (Refer to 23 -
BODY/INTERIOR/REAR FLOOR STOWAGE BIN -
INSTALLATION).
Fig. 22 LIFTGATE SILL SCUFF PANEL
1 - LIFTGATE SILL SCUFF PLATE
2 - REAR BUMPER
CS
INTERIOR
23 - 99
(9) Install liftgate sill scuff plate. (Refer to 23 -
BODY/INTERIOR/LIFTGATE SILL SCUFF PLATE -
INSTALLATION).
(10) Install rear door sill scuff plate. (Refer to 23 -
BODY/INTERIOR/REAR
DOOR
SILL
SCUFF
PLATE - INSTALLATION).
(11) Open rear door and liftgate.
REAR DOOR SCUFF PLATE
REMOVAL
(1) Using trim stick (C-4755), disengage push pins
attaching door sill plate to door sill.
(2) Remove door sill scuff plate from vehicle (Fig.
24).
INSTALLATION
(1) Place sill scuff plate in position on vehicle (Fig.
24).
(2) Place 4-way locator pin into position.
(3) Press sill scuff plate down to engage push pins
to door sill.
Fig. 23 QUARTER TRIM PANEL
1 - BODY SIDE
2 - LOCATION PINS
3 - QUARTER TRIM PANEL
4 - POWER OUTLET WIRE CONNECTOR
5 - POWER OUTLET MOUNT AND CAP
6 - POWER OUTLET BASE
7 - C-PILLAR LOWER
8 - ATTACHING SCREW
9 - GROMMET
10 - TIE DOWN RING AND SCREW
Fig. 24 REAR DOOR SILL SCUFF PLATE
1 - PUSH PINS
2 - 4-WAY LOCATION PIN
3 - REAR DOOR SILL SCUFF PLATE
23 - 100
INTERIOR
CS
QUARTER TRIM PANEL (Continued)
REAR FLOOR CONSOLE
REMOVAL
(1) Using a trim stick C-4755 or equivalent, disen-
gage the locking tabs and remove floor console scuff
plate (Fig. 25).
(2) Remove four attaching screw under scuff plate.
(3) Open cup holder and remove two attaching
screws on the bottom.
(4) Remove sidewalls attaching screws, three per
side.
(5) Remove rear floor console from vehicle.
INSTALLATION
(1) Place rear floor console into position (Fig. 25).
(2) Install sidewalls attaching screws, three per
side.
(3) Instal two attaching screws in bottom of cup
holder.
(4) Install four attaching screw under scuff plate.
(5) Place floor console scuff plate into position and
press down to engage the locking tabs.
Fig. 25 REAR FLOOR CONSOLE
1 - FRONT FLOOR CONSOLE
2 - ATTACHING SCREWS
3 - FLOOR CONSOLE SCUFF PLATE
4 - REAR FLOOR CONSOLE
5 - REAR FLOOR CONSOLE WIRE CONNECTOR
6 - FLOOR CONSOLE BASE ASSEMBLY
CS
INTERIOR
23 - 101
REAR FLOOR STOWAGE BIN
REMOVAL
(1) Open liftgate.
(2) Open rear floor storage bin lid (Fig. 26).
(3) Remove attaching screws (4) in the bottom of
bin.
(4) Remove floor storage bin from vehicle.
INSTALLATION
(1) Place floor storage bin into position (Fig. 26).
(2) Install attaching screws (4) in the bottom of
bin.
(3) Close rear floor storage bin lid.
(4) Close liftgate.
Fig. 26 FLOOR STORAGE BIN
1 - PUSH PIN
2 - WHEELHOUSE SILENCER
3 - BODY SIDE PANEL
4 - FLOOR STORAGE BIN
5 - ATTACHING SCREWS
6 - FLOOR SILENCER
7 - REAR FLOOR PANEL
23 - 102
INTERIOR
CS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст