Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 470
10. Steering column reinforcement installed.
11. Install the Steering column reinforcement cover.
12. Install trim panel end.
13. Install the Bezel cluster.
8I - 58
IGNITION SYSTEM - SERVICE INFORMATION
LX
14. Install the ignition switch bezel ring.
15. Connect the negative battery cable.
LX
IGNITION SYSTEM - SERVICE INFORMATION
8I - 59
CYLINDER-IGNITION KEY AND LOCK
REMOVAL
1. Disconnect the negative battery cable.
2. Remove bezel ignition switch ring.
3. Pull center console bezel loose from instrument panel.
4. Insert ignition key and turn to the “ON” position.
5. Depress the locking tab on the ignition switch
housing.
6. Pull the key cylinder from the ignition switch hous-
ing.
8I - 60
IGNITION SYSTEM - SERVICE INFORMATION
LX
INSTALLATION
1. Install key in lock cylinder. Turn key to “ON” posi-
tion
(retaining
tab
on
lock
cylinder
can
be
depressed).
2. The shaft at the end of the lock cylinder aligns with
the socket in the end of the housing. To align the
socket with the lock cylinder, ensure the socket is
in the “ON” position.
3. Align the lock cylinder with the grooves in the
housing. Slide the lock cylinder into the housing
until the tab sticks through the opening in the
housing.
4. Turn key to Off position and remove key.
LX
IGNITION SYSTEM - SERVICE INFORMATION
8I - 61
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст