Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1649
30. Install the accessory belt.
31. Install the charge air resonator.
32. Install the coolant bypass hose.
33. Install the upper radiator hose.
9 - 2620
ENGINE - 3.0L TD SERVICE INFORMATION
LX
34. Connect the EGR valve connector.
35. Install the clamp (1) on the exhaust elbow.
Tighten the clamp to 20 N·m (15 in. lbs.).
36. Discard the old gasket and clean the EGR tube
sealing surfaces.
37. Install a new gasket on the EGR tube (3).
38. Install the EGR tube (3) and tighten the bolts to 9
N·m (79 in. lbs.)
39. Discard the old gasket and clean the exhaust pipe
and turbocharger sealing surfaces.
40. Install a new gasket between the exhaust pipe
and turbocharger.
41. Install the exhaust pipe (2) to the turbocharger
and tighten the bolts to 20 N·m (15 in. lbs.) and
then an additional 90°.
42. Install the turbocharger heat shield.
43. Install the strut tower support.
44. Install the engine cowl. (Refer to 23 - BODY/EX-
TERIOR/COWL GRILLE - INSTALLATION)
LX
ENGINE - 3.0L TD SERVICE INFORMATION
9 - 2621
45. Install the air cleaner housing.
46. Install the engine cover.
47. Fill the cooling system. (Refer to 7 - COOLING -
STANDARD PROCEDURE)
48. Connect the negative battery cable. (Refer to 8 -
ELECTRICAL/BATTERY
SYSTEM/CABLES
-
INSTALLATION)
9 - 2622
ENGINE - 3.0L TD SERVICE INFORMATION
LX
ENGINE COVER
1. Align the rear of the engine cover (1) with the rear
mounting bracket slots and seat the cover into the
bracket.
2. Push down on the cover (1) and install the fasten-
ers.
3. Tighten fasteners to 5 N·m (44 in. lbs.).
4. Install the oil cap.
SPECIFICATIONS
ENGINE SPECIFICATIONS
GENERAL DESCRIPTION
DESCRIPTION
SPECIFICATION
Displacement 3.0L
3.0L (2985 cc) (182 CID)
Bore
83 mm
Stroke
92 mm
Compression Ratio
18 :1
Weight
215Kg (474 Lbs.)
Power
160Kw (215 HP) @ 4200 RPM
Torque
510 N·m (376 Ft. Lbs.) @ 1800 RPM
Idle Speed - Warm
620 RPM
Belt Tension
Automatic Belt Tensioner
Thermostat Opening
80°C ± 2°C
Cooling System Capacity
13.3 Liters (14 qts.)
Engine Oil Capacity
9.5L (10 Qt.) W/Filter Change
Timing System
Chain Driven Dual Overhead Camshafts
Air Intake
Dry Filter With Turbocharger and Charge Air Cooler
Fuel Supply
Electric Pump In The Fuel Tank
Fuel System
Direct Fuel Injection Common Rail System
Combustion Cycle
4 Stroke
Cylinder Compression Difference Between Cylinders
5 Bar (72.5 psi.)
Cooling System
Water Cooling
Injection Pump
CP3 2nd. Generation Common Rail System
LX
ENGINE - 3.0L TD SERVICE INFORMATION
9 - 2623
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст