Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 466
3.5L
1. Disconnect negative battery cable.
2. Remove the intake manifold, (Refer to 9 - ENGINE/
MANIFOLDS/INTAKE MANIFOLD - REMOVAL)
3. Prior to removing the ignition coils, spray com-
pressed air around the coil area.
4. Unlock and remove electrical connector from igni-
tion coil.
On 3.5L engines, it is necessary to loosen the screws
by alternating back and forth. Do not lose the spacers
under the coil when loosening the screws.
5. Remove 2 fasteners from ignition coil assembly.
6. Remove ignition coil assembly.
8I - 42
IGNITION SYSTEM - SERVICE INFORMATION
LX
5.7/6.1L
A separate ignition coil (1), mounted to the valve cover
is used for each cylinder. Each coil fires the two spark
plugs at times predetermined by the Powertrain Con-
trol Module (PCM).
1. Unlock electrical connector (1) by pressing on tab
while pulling electrical connector from coil.
2. Remove two coil mounting bolts (3).
LX
IGNITION SYSTEM - SERVICE INFORMATION
8I - 43
3. Carefully pull up coil from cylinder head opening
with a slight twisting action. Twisting will help break
loose boots (1) from spark plugs.
INSTALLATION
2.7L
1. Install ignition coil assembly to spark plug.
2. Install coil screws and tighten: 2.7L engine to 6.2
N·m (55 in. lbs.).
3. Connect the electrical connector and lock.
8I - 44
IGNITION SYSTEM - SERVICE INFORMATION
LX
4. Install the intake manifold, (Refer to 9 - ENGINE/
MANIFOLDS/INTAKE
MANIFOLD
-
INSTALLA-
TION)
5. Connect negative battery cable.
3.5L
On 3.5L engines, it is necessary to tighten the screws
by alternating back and forth. Do not lose the spacers
under the coil when installing ignition coils.
1. Install ignition coil assembly to spark plug.
2. Install coil screws and tighten 3.5L engines to 6.7
N·m (60 in. lbs.).
3. Connect the electrical connector and lock.
LX
IGNITION SYSTEM - SERVICE INFORMATION
8I - 45
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст