Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 467
4. Install the intake manifold, (Refer to 9 - ENGINE/
MANIFOLDS/INTAKE
MANIFOLD
-
INSTALLA-
TION)
5. Connect negative battery cable.
5.7/6.1L
1. Before installing coil(s), apply dielectric grease to
inside of spark plug boots (1).
8I - 46
IGNITION SYSTEM - SERVICE INFORMATION
LX
2. Position ignition coil into valve cover and push both
spark plug boots onto each spark plug.
3. Install two coil mounting bolts (3) and tighten to 12
N·m (105 in. lbs.).
4. Connect electrical connector (1) to coil and lock
connector.
LX
IGNITION SYSTEM - SERVICE INFORMATION
8I - 47
CAPACITOR-IGNITION COIL
REMOVAL
2.7/3.5L
1. Remove the negative battery cable.
2. Disconnect the electrical connector.
3. Remove nut and capacitor.
6.1L
The ignition capacitor (1) is attached to the left-rear
corner of the intake manifold (3).
1. Remove electrical connector (2).
2. Remove mounting nut (4) and remove capacitor.
8I - 48
IGNITION SYSTEM - SERVICE INFORMATION
LX
INSTALLATION
2.7/3.5L
1. Install capacitor and tighten nut.
2. Attach electrical connector to capacitor.
3. Install the negative battery cable.
6.1L
1. Install sensor (1) to mounting stud.
2. Install and tighten nut (4).
3. Install electrical connector (2).
LX
IGNITION SYSTEM - SERVICE INFORMATION
8I - 49
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст