Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 427
12. Match flats inside intermediate shaft with that in
intermediate shaft extension, then slide intermedi-
ate shaft onto extension.
13. Aline the hole in the shafts.
14. Install pinch bolt fastening intermediate shaft to
intermediate shaft extension.
15. Tighten pinch bolt to 43 N·m (32 ft. lbs.).
16. Install the underbody splash shield.
17. Lower vehicle.
18. Remove the steering wheel holder.
19. Connect negative battery cable.
8F - 94
STARTING
LX
3.0L diesel
1. Install starter to vehicle.
2. Install the 2 mounting bolts. Torque fasteners to
54.2 N·m (40 ft. lbs.).
LX
STARTING
8F - 95
3. Connect battery connection.
4. Connect solenoid connection.
5. Starter installed.
6. Install the rear belly pan.
8F - 96
STARTING
LX
7. Install the middle belly pan.
8. Lower vehicle.
9. Connect negative battery cable.
3.5L
1. Work starter up and pass the transmission and
exhaust.
LX
STARTING
8F - 97
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст