Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 125
COVER-DIFFERENTIAL
REMOVAL
1. Remove axle assembly from vehicle. (Refer to 3 -
DIFFERENTIAL
&
DRIVELINE/REAR
AXLE
-
210MM - REMOVAL)
2. Remove axle housing cover bolts (1). Using suit-
able screwdriver, pry cover (2) from housing.
INSTALLATION
1. Thoroughly clean cover and install a 4 mm (0.157
in.) bead of Mopar
T
AXLE RTV (2) as shown.
3 - 232
REAR AXLE - 210RII
LX
2. Immediately install cover. Install and torque bolts
(1) to 50 N·m (37 ft. lbs.).
3. Install axle assembly to vehicle. (Refer to 3 - DIF-
FERENTIAL & DRIVELINE/REAR AXLE - 210MM -
INSTALLATION)
LX
REAR AXLE - 210RII
3 - 233
GEAR-PINION/RING
REMOVAL
1. Remove differential assembly. (Refer to 3 - DIF-
FERENTIAL & DRIVELINE/REAR AXLE - 210MM/
DIFFERENTIAL - REMOVAL)
2. Place differential case in a soft-jawwed vise and
remove ring gear-to-case bolts (1).
3. Remove ring gear from differential case with a
brass drift (1) and hammer.
3 - 234
REAR AXLE - 210RII
LX
4. Using
41mm
socket
and
flange
wrench Tool
C-3281 (1), remove pinion nut and discard.
5. Using puller Tool 1026 (1), remove pinion flange
(2).
6. Using a suitable screwdriver, remove and discard
the pinion seal.
7. Remove pinion tail bearing cone.
LX
REAR AXLE - 210RII
3 - 235
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст