Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 2084
20. Remove the input gear and hollow shaft assembly
(1) from the front housing (2).
21. Remove the snap-ring (2) holding the input shaft
(1) in the hollow shaft (3).
22. Remove the input gear thrust washer (2) from the
input shaft (1) and hollow shaft (3).
21 - 870
TRANSFER CASE - MS140 - SERVICE INFORMATION
LX
23. Remove the hollow shaft (2) from the input shaft
(1).
CAUTION: Inspect the needle bearing located
inside the hollow shaft. If the needle bearing is
within 1 mm (0.040 in.) of the edge of the hollow
shaft, the hollow shaft must be replaced. DO NOT
attempt to drive the bearing back into the hollow
shaft.
24. Install the jaws from Remover L-4518 (2) into the
intermediate gear rear bearing race in the rear
housing (1).
25. Install the cup from Remover L-4518 (2) onto the
jaws. Install the bearing, washer, and nut onto the
threaded shaft and remove the bearing race.
26. Repeat Step 24 and Step 25 for the other blind
bearing races in the front and rear housings.
27. Drive out the input gear and front output shaft
seals with a suitable drift.
28. Drive out the front hollow shaft and front output
shaft front bearing races with a suitable brass
drift.
LX
TRANSFER CASE - MS140 - SERVICE INFORMATION
21 - 871
29. Remove the front output shaft (2) front bearing
with Press C-293-PA (1) and Adapters C-293-52
(3).
30. Remove the front output shaft (4) rear bearing
with Press C-293-PA (1), Plug 8513A (2), and
Adapters C-293-52 (3).
31. Remove the front hollow shaft (3) bearing with
Press C-293-PA (1), Plug 9678 (2), and Adapters
C-293-48 (4).
21 - 872
TRANSFER CASE - MS140 - SERVICE INFORMATION
LX
32. Remove the rear hollow shaft (4) bearing with
Press C-293-PA (1), Plug SP3289 (2), and Adapt-
ers C-293-48 (3).
33. Remove the front and rear intermediate gear (4)
bearings with Press C-293-PA (1), Plug 8513A (2),
and Adapters C-293-40 (3).
ASSEMBLY
1. Install the intermediate gear rear bearing race into
the rear housing (1) with Handle C-4171 (2) and
Installer D-130 (3).
LX
TRANSFER CASE - MS140 - SERVICE INFORMATION
21 - 873
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст