Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 2085
2. Install the intermediate gear front bearing race into
the front housing (1) with Handle C-4171 (2) and
Installer D-130 (3).
3. Install the hollow shaft front bearing race into the
front housing (1) with Handle C-4171 (2) and
Installer C-4308 (3).
4. Install the hollow shaft rear bearing race into the
rear housing (1) with Handle C-4171 (2) and
Installer D-145 (3).
21 - 874
TRANSFER CASE - MS140 - SERVICE INFORMATION
LX
5. Install the front output shaft front bearing race into
the front housing (1) with Handle C-4171 (2) and
Installer D-130 (3).
6. Install the front output shaft rear bearing race into
the rear housing (1) with Handle C-4171 (2) and
Installer D-130 (3).
7. Install the front output shaft front bearing (2) onto
the front output gear (3) with Installer C-3717 (1).
LX
TRANSFER CASE - MS140 - SERVICE INFORMATION
21 - 875
8. Install the front output shaft rear bearing onto the
front output gear (3) with Handle C-4171 (1) and
Installer L-4410 (2).
9. Install the front and rear bearings onto the interme-
diate gear (3) with Handle C-4171 (1) and Installer
L-4410 (2).
10. Install the front bearing onto the hollow shaft (3)
with Handle C-4171 (1) and Installer C-4213 (2).
11. Install the rear bearing onto the hollow shaft with
Installer 9679.
21 - 876
TRANSFER CASE - MS140 - SERVICE INFORMATION
LX
12. Install a new front output shaft seal into the front
housing with Insataller MD998334.
NOTE: Apply a light coating of oil to both the inner
lip and outer surface of the new oil seal.
13. Install a new input gear seal in the front housing
(1) using Installer 8891 (2).
14. Set the hollow shaft in position in the front hous-
ing.
15. Install the input shaft through the front seal and
the hollow shaft.
16. Install the input gear thrust washer (2) onto the
input shaft (1) and hollow shaft (3).
17. Install the snap-ring (2) to hold the input shaft (1)
in the hollow shaft (3).
LX
TRANSFER CASE - MS140 - SERVICE INFORMATION
21 - 877
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст