Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 2370

4. Relocate the purge solenoid.

5. Unlock and disconnect the electrical connector

from EGR valve.

6. Remove upper tube bolts to EGR valve (2).

7. Remove upper tube from intake manifold.

8. When removing EGR upper tube assembly being

careful not to drop the silicone rubber seals in the
intake manifold. Clean gasket surfaces on the EGR
valve. Note that any loose dirt can lodge between
the pintle and the seat and cause valve leakage
that will give a rough idle and depressed manifold
vacuum.

9. Clean mounting surface.

25 - 38

EXHAUST GAS RECIRCULATION

LX

3.5L

1. Disconnect negative battery cable.

2. Remove purge solenoid from bracket.

3. Relocate the purge solenoid.

LX

EXHAUST GAS RECIRCULATION

25 - 39

4. Unlock and disconnect the electrical connector

from EGR valve.

5. Remove the wiper module, (Refer to 8 - ELECTRI-

CAL/WIPERS/WASHERS/WIPER

MODULE

-

REMOVAL).

6. Remove shock tower brace and relocate.

7. Remove the upper intake manifold, (Refer to 9 -

ENGINE/MANIFOLDS/INTAKE

MANIFOLD

-

REMOVAL).

8. EGR valve (2) and tube (1).

25 - 40

EXHAUST GAS RECIRCULATION

LX

9. Remove tube bolts (1) to EGR valve (2).

10. Remove tube (1) from intake manifold.

11. When removing EGR upper tube assembly being

careful not to drop the silicone rubber seals in the
intake manifold. Clean gasket surfaces on the
EGR valve. Note that any loose dirt can lodge
between the pintle and the seat and cause valve
leakage that will give a rough idle and depressed
manifold vacuum.

12. Clean mounting surface.

INSTALLATION

2.7L - LOWER TUBE

1. Clean mounting surface.

LX

EXHAUST GAS RECIRCULATION

25 - 41