Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 2369
EXHAUST GAS RECIRCULATION
SPECIFICATIONS
TORQUE
DESCRIPTION
N·m
Ft. Lbs.
In. Lbs.
Tube to Exhaust Manifold
Bolts
31
23
275
Tube to EGR valve Bolts
11
-
95
EGR Valve to Cyl. Head
Bolts
31
23
275
25 - 34
EXHAUST GAS RECIRCULATION
LX
TUBE-EXHAUST GAS RECIRCULATION
REMOVAL
2.7L - LOWER TUBE
1. Disconnect negative battery cable.
2. Remove purge solenoid from bracket.
LX
EXHAUST GAS RECIRCULATION
25 - 35
3. Relocate the purge solenoid.
4. Unlock and disconnect the electrical connector
from EGR valve.
5. Remove the bolts from the lower tube to exhaust
manifold.
6. Remove the lower tube bolts to EGR valve.
7. Remove lower tube from vehicle.
8. When removing EGR upper tube assembly being
careful not to drop the silicone rubber seals in the
intake manifold. Clean gasket surfaces on the EGR
valve. Note that any loose dirt can lodge between
the pintle and the seat and cause valve leakage
that will give a rough idle and depressed manifold
vacuum.
9. Clean mounting surface.
25 - 36
EXHAUST GAS RECIRCULATION
LX
2.7L - UPPER TUBE
1. EGR system components and location. Upper tube
(2), EGR valve (1), and Lower tube (3).
2. Disconnect negative battery cable.
3. Remove purge solenoid from bracket.
LX
EXHAUST GAS RECIRCULATION
25 - 37
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст