Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 572
ELECTRONIC VEHICLE INFORMATION CENTER
DESCRIPTION
The Electronic Vehicle Information Center (EVIC) fea-
tures a driver-interactive display. The display is located
in the upper part of the instrument cluster between the
speedometer and tachometer. This system conve-
niently allows the driver to select a variety of useful
information by pressing the switches mounted on the
steering wheel. The EVIC displays information related
to the following:
•
System Status
•
Vehicle information warning message displays
•
Tire Pressure Monitor System — If Equipped
•
Personal Settings (customer programmable features)
•
Compass display
•
Outside temperature display
•
Trip computer functions
•
UConnect™ hands-free communication system displays — If Equipped
•
Navigation system screens — If Equipped
•
Audio mode display
The EVIC system is comprised of several different components. Those components are:
•
Instrument Cluster
•
Steering Wheel Switches
•
Ambient Temperature Sensor
•
Electronic Overhead Module
•
Controller Area Network (CAN) Data Bus
•
Local Interface Network (LIN) Data Bus
The EVIC display is part of the Instrument Cluster assembly and is not serviced as a separate component. If the
display is inoperative the complete Instrument Cluster assembly must be replaced, (Refer to 8 - ELECTRICAL/IN-
STRUMENT CLUSTER - REMOVAL). If the steering wheel switches are inoperative and require replacement, (Refer
to 8 - ELECTRICAL/AUDIO/REMOTE SWITCHES - REMOVAL) for the appropriate procedure. If the compass posi-
tion sensor (Electronic Overhead Module) is inoperative and requires replacement, (Refer to 8 - ELECTRICAL/
OVERHEAD CONSOLE/UNIVERSAL TRANSMITTER - REMOVAL) for the appropriate procedure.
OPERATION
The Electronic Vehicle Information Center (EVIC) uses both non-switched and ignition switched sources of battery
current so that some of its features remain operational at any time, while others may only operate with the ignition
switch in the On position. When the ignition switch is turned to the On position, the EVIC display will return to the
last function being displayed before the ignition was turned to the Off position.
The EVIC system is comprised of several different components that communicate over the Controller Area Network
(CAN) and Local Interface Network (LIN) Data Buses. If the system is inoperative a scan tool and the appropriate
diagnostic information must be used to diagnose the system.
8M - 158
OVERHEAD CONSOLE - SERVICE INFORMATION
LX
The steering wheel switches are used to operate the
different functions of the EVIC system. Pressing and
releasing the MENU button (1) will change the mode
displayed
between Trip
Functions,
Navigation
(If
Equipped), System Status, Personal Settings, and
Telephone (If Equipped). Pressing and releasing the
C/T (compass/thermometer) button (3) will cause the
EVIC to return to the compass/thermometer/trip com-
puter display mode from any other mode.
The SCROLL buttons (3) are used to scroll through
Trip Functions, Navigation (If Equipped), System Sta-
tus Messages, and Personal Settings (Customer Pro-
grammable Features). Pressing and releasing the
FUNCTION SELECT button (1) accepts a selected
choice.
The AUDIO
MODE
SELECT
button
(2)
changes the mode of the radio from AM to FM to Tape
to CD, or to Satellite (SAT) depending on which radio
is in the vehicle. This button can also be used to
return to a previous navigation menu selection.
EVIC DISPLAY MODES
SYSTEM STATUS MODE
Displays warnings and user interaction messages. Initial warnings will be displayed full-screen for three seconds,
then override the odometer and show text warnings on the bottom line of the display. Critical text warnings will be
displayed until the failure is corrected. Non-critical text warnings will be displayed for 60 seconds. The driver can
scroll to view multiple messages by using the SCROLL buttons.
When the appropriate conditions exist, the EVIC displays the following messages:
•
Turn Signal On (with a continuous warning chime)
•
Left Front Turn Signal Lamp Out
•
Left Rear Turn Signal Lamp Out
•
Right Front Turn Signal Lamp Out
•
Right Rear Turn Signal Lamp Out
•
RKE Battery Low (with a single chime)
•
Memory 1/2 Profile Set
•
Memory 1/2 Profile Recall
•
Memory System Disabled – Vehicle Not In Park (with a single chime)
LX
OVERHEAD CONSOLE - SERVICE INFORMATION
8M - 159
•
Memory System Disabled – Seat Belt Buckled (with a single chime)
•
Personal Settings Not Available – Vehicle Not in Park
•
Left/Right Front Door Ajar (one or more, with a single chime if speed is above 1 mph)
•
Left/Right Rear Door Ajar (one or more, with a single chime if speed is above 1 mph)
•
Door (S) Ajar (with a single chime if vehicle is in motion)
•
Trunk Ajar (with a single chime)
•
Low Washer Fluid (with a single chime)
•
Adjustable Pedals Disabled – Cruise Engaged
•
Adjustable Pedals Disabled – Vehicle In Reverse
•
Channel 1, 2, OR 3 Transmit
•
Channel 1, 2, OR 3 Training
•
Channel 1, 2, OR 3 Trained
•
Clearing Channels
•
Channels Cleared
•
Channels Defaulted
•
Did Not Train
•
Left Front Tire Low Pressure
•
Left Rear Tire Low Pressure
•
Right Front Tire Low Pressure
•
Right Rear Tire Low Pressure
•
Check Tire Pressure Monitoring (TPM) System
•
Service Park Assist System
TRIP MODE
Provides a choice of units displayed in English or metric. The following information can be displayed at the top of
the screen:
•
Average Miles Per Gallon (MPG)
•
Distance to empty (DTE)
•
Trip A odometer
•
Trip B odometer
•
Elapsed time
The EVIC trip computer features several functions that can be reset. Pressing and releasing the FUNCTION
SELECT button once will clear the resettable function currently being displayed. Reset will only occur if a resettable
function is currently being displayed. To reset all resettable functions, press and release the FUNCTION SELECT
button a second time within 3 seconds of resetting the currently displayed function (>Reset ALL will be displayed
during this 3 second window).
The odometer is displayed at the bottom of the screen. If warnings exist, they will replace the odometer in the
display. The driver can scroll to view information in the EVIC by using the SCROLL buttons.
COMPASS, TEMPERATURE AND AUDIO MODE
Compass heading and outside temperature are displayed at the top of the screen. On the lower half of the screen
the audio mode is displayed along with the odometer. Eight-point compass headings are displayed (N, S, E, W, NE,
NW, SE, SW) and up to 15 compass variance settings can be set and recalled. Outside temperature is displayed in
°C (degrees Celsius) or °F (degrees Fahrenheit). Audio mode can display any one of 12 radio station preset fre-
quencies, CD disc number, CD track number, tape, and one of 200 Satellite Radio Channels - if equipped.
TELEPHONE MODE - IF EQUIPPED
Provides the following information and features for the optional hands-free communications system:
•
Phone status: idle, voice mail, roaming, battery strength and signal strength in increments of 20 percent
•
Call status: Incoming call, connecting, connected, air time in minutes and seconds, call ended, busy, call failed,
roaming and no phone connection
•
Caller ID phone number display
8M - 160
OVERHEAD CONSOLE - SERVICE INFORMATION
LX
NAVIGATION MODE - IF EQUIPPED
When the Navigation System is On, the steering wheel buttons can be used to select the Map or Menu display on
the Navigation Unit. When the Menu display is active, the SCROLL buttons can be used to scroll through the list,
the FUNCTION SELECT button can be used to select an item, and the AUDIO MODE SELECT button can be used
to return to the previous menu. When the Map display is active, pressing the FUNCTION SELECT button will
change the Navigation Unit Display to the Menu.
If Turn by Turn Navigation is enabled through Personal Settings, the Navigation System will provide turn by turn
directions to the programmed destination in the EVIC display. The name of the approaching road is displayed at the
top of the screen, followed by an arrow to show the direction of the turn and the remaining distance to the turn
counted down.
PERSONAL SETTINGS MODE (CUSTOMER PROGRAMMABLE FEATURES)
Allows the driver to set and recall features when the transmission is in Park by pressing and releasing the MENU
button until Personal Settings is displayed in the EVIC. The following personal settings can be set and recalled:
•
Language: English, Spanish, German, Italian or French
•
Display units in English or Metric
•
Lock doors automatically at 15 mph (24 Kph), On or Off
•
Unlock door automatically on exit, On or Off
•
Remote Keyless Entry unlock driver door on first press or unlock all doors on first press
•
Recall Memory with Remote Keyless Entry Unlock, On or Off
•
Sound horn with Remote Keyless Entry Lock, On or Off
•
Delay turning headlamps off for 0, 30, 60 or 90 seconds
•
Headlamps on with wipers, On or Off
•
Rain Sensing Intermittent Wipers, On or Off
•
Automatically move seat back on exit, On or Off
•
Tilt mirrors down and in when transmission is shifted to Reverse, On or Off
•
Delay Power off to accessories until exit off, 45-seconds maximum, 5-minute maximum, 10-minute maximum
or 60-minute maximum
•
Turn headlamps on with Remote Keyless Entry Lock, On or Off
•
Turn headlamps on with Remote Keyless Entry Unlock, Off or 30 seconds
•
Park Assist System, On or Off
•
Confirmation of Voice Commands, On or Off
•
Turn-by-Turn Navigation, On or Off
DIAGNOSIS AND TESTING
ELECTRONIC VEHICLE INFORMATION CENTER
The Electronic Vehicle Information Center (EVIC) data is obtained from several components on the Controller Area
Network (CAN) Data Bus circuit. The EVIC will not function properly if the bus messages from any of these com-
ponents is not received. If no EVIC data is displayed, check the CAN Data Bus circuit communications, the Instru-
ment Cluster functions and the Front Control Module (FCM).
The use of a scan tool and the proper diagnostic procedures information are recommended for further testing of the
EVIC and the CAN Data Bus circuit. Refer to the appropriate wiring information for complete circuit schematic or
connector pin-out information.
STANDARD PROCEDURE
COMPASS CALIBRATION
CAUTION: Do not place any external magnets, such as magnetic roof mount antennas, in the vicinity of the
compass. Do not use magnetic tools when servicing the overhead console.
LX
OVERHEAD CONSOLE - SERVICE INFORMATION
8M - 161
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст