Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1767
11. Fold the foam pad covering access cover for mod-
ules back into place.
12. Install rear lower seat cushion
14 - 142
FUEL DELIVERY - DIESEL
LX
13. Rear lower seat cushion installed.
14. Fill fuel tank.
15. Connect negative battery cable.
16. Fill fuel tank. Use the scan tool to pressurize the
fuel system. Check for leaks.
LX
FUEL DELIVERY - DIESEL
14 - 143
SENSOR-FUEL LEVEL SENDING UNIT
REMOVAL
LEFT SIDE MODULE
1. Release the fuel pressure, refer to the Fuel Pressure Release Procedure in this section.
2. Disconnect negative battery cable.
NOTE: The fuel level of the vehicle must be below 5/8 of a tank before you remove the module lock-rings.
If it is above that you can spill fuel in the vehicle.
3. Drain partial fuel from fuel tank through the filler
tube. Use a hard nylon tube, with a 30° cut on the
end, to push the check valve open to drain fuel
from tank.
4. Remove the rear lower seat cushion.
14 - 144
FUEL DELIVERY - DIESEL
LX
5. Push seat back and up to remove seat cushion.
6. Fold back the foam pad covering access cover for
modules.
LX
FUEL DELIVERY - DIESEL
14 - 145
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст