Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1549
ENGINE MOUNTING
DESCRIPTION
The engine mounting system are of molded rubber material and consist of two mounts; right and a left side support
the powertrain, and control powertrain torque.
9 - 2220
ENGINE - 3.5L - SERVICE INFORMATION
LX
MOUNT -LEFT
REMOVAL
1. Disconnect the negative battery cable.
2. Raise and support the vehicle.
3. Remove both engine mount to cradle nuts and
remove the left engine mount studs.
4. Using a suitable jack and a block of wood under
the oil pan, raise the engine until the weight is off
of the mounts (approximately 5mm).
5. Remove the engine mount heat shield.
6. Remove the engine mount bolts and remove the
mount.
LX
ENGINE - 3.5L - SERVICE INFORMATION
9 - 2221
INSTALLATION
1. Install the left mount (2) to the engine mounting
bracket. Hand tighten fasteners.
2. Install and hand tighten the engine mount through
studs.
3. Tighten the engine mount to mounting bracket fas-
teners to 75 N·m ( 55 ft.lbs.).
4. Lower the engine and remove lifting device.
5. Tighten the engine mount through studs to nut to
12 N·m ( 106 in.lbs.).
6. Install the engine mount heat shield (2). Tighten
fasteners to 11 N·m ( 97 in.lbs.).
7. Install the left engine mount to cradle nuts and
tighten both to 75 N·m (55 ft. lbs.).
8. Lower the vehicle.
9. Connect the negative battery cable.
9 - 2222
ENGINE - 3.5L - SERVICE INFORMATION
LX
MOUNT LEFT - AWD
REMOVAL
1. Disconnect the negative battery cable.
2. Raise and support the vehicle.
3. Remove the left front wheel.
4. Remove the left engine mount to cradle fastener.
5. Place a jack stand under the engine and support
the engine weight.
6. Remove the engine mount fasteners and remove
the mount.
INSTALLATION
1. Carefully position the engine mount and hand
tighten the mount retaining bolts.
2. Tighten the engine mount to bracket bolts to 60
N·m (44 lbs. ft.).
3. Lower the engine onto the cradle and remove the
jack stand.
4. Tighten the engine mount to cradle bolt to 75 N·m
(55 lbs. ft.).
5. Install the right front wheel.
6. Lower the vehicle.
7. Connect the negative battery cable.
LX
ENGINE - 3.5L - SERVICE INFORMATION
9 - 2223
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст