Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 518
BALLAST MODULE
1. Connect the two electrical connectors (1 and 2).
•
One of the connectors (1) will be a standard
push tab to release connector.
•
The second connector (2) has a lever that must
be locked when connected.
2. Position the ballast module in of headlamp unit.
3. From the underside of the headlamp unit, install
the six retaining screws (1).
4. Install the headlamp unit (Refer to 8 - ELECTRI-
CAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP
UNIT - INSTALLATION).
8L - 102
LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION
LX
CABLE
1. Maneuver cable through headlamp unit.
2. Connect the cable electrical connectors (2). The
connector (2) has a lever that must be locked when
connected.
LX
LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION
8L - 103
3. From the underside of the headlamp unit, install
the six retaining screws (1).
4. Connect the electrical cable connector to the
lamp/igniter.
5. Install the rubber boot (1) protecting the lamp/ig-
niter from the elements.
8L - 104
LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION
LX
6. Install the headlamp unit (Refer to 8 - ELECTRI-
CAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP
UNIT - INSTALLATION).
LX
LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION
8L - 105
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст