Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1610
12. Remove the intake manifold and IAFM as an
assembly (Refer to 9 - ENGINE/MANIFOLDS/IN-
TAKE MANIFOLD - REMOVAL).
13. Remove the ground wires from the rear of each
cylinder head.
14. Disconnect the heater hoses (1).
9 - 2464
ENGINE - 6.1L SERVICE INFORMATION
LX
NOTE: It is not necessary to disconnect P/S hoses
from pump, for P/S pump removal.
15. Remove the power steering pump and set aside.
16. Disconnect the fuel supply line (Refer to 14 -
FUEL SYSTEM/FUEL DELIVERY/QUICK CON-
NECT FITTING - STANDARD PROCEDURE).
17. Raise and support the vehicle on a hoist and
drain the engine oil.
18. Remove the belly pan (2) (Refer to 23 - BODY/
EXTERIOR/BELLY PAN - REMOVAL).
19. Remove engine front mount to frame nuts.
20. Disconnect the transmission oil cooler lines from
their retainers at the oil pan bolts.
21. Disconnect exhaust pipe at manifolds.
22. Disconnect the starter wires. Remove starter
motor (1) (Refer to 8 - ELECTRICAL/STARTING/
STARTER MOTOR - REMOVAL).
LX
ENGINE - 6.1L SERVICE INFORMATION
9 - 2465
23. Remove the torque converter access cover (1).
24. Remove drive plate to converter bolts (1).
9 - 2466
ENGINE - 6.1L SERVICE INFORMATION
LX
25. Remove transmission bell housing to engine block
bolts (2).
26. Lower the vehicle.
27. Install engine lift fixture (2), special tool # 8984
and 8984–UPD (4).
28. Separate
engine
from
transmission,
remove
engine from vehicle, and install engine assembly
on a repair stand.
LX
ENGINE - 6.1L SERVICE INFORMATION
9 - 2467
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст