Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 2168
INSTALLATION
LOWER
1. Check to be certain that the two U-nuts (5) are properly installed and in good condition on the inside of the
liftgate (4).
2. Check to be certain that the seven push-in plastic fasteners (7) are properly installed and in good condition on
the inside of the lower trim panel (1).
3. Position the upper corners of the lower trim panel over the lower corners of the upper trim panel on the inside
of the liftgate.
4. Align the three locator pins (2) on the back of the trim panel to the locator holes (3) on the inside of the liftgate.
5. Using hand pressure, press firmly and evenly on the trim panel over each of the seven push-in plastic fastener
locations until the fasteners are fully engaged in the holes on the inside of the liftgate.
6. Install and tighten the two screws (6) within the pull cup formation to the right of the latch that secure the lower
trim panel to the U-nuts on the inside of the liftgate. Tighten the screws to 3 N·m (27 in. lbs.).
7. Reinstall the lamp into the lower liftgate trim panel.
8. Reconnect the battery negative cable.
23 - 220
LIFTGATE
LX
UPPER
1. Check to be certain that the eight push-in plastic fasteners (5) are properly installed and in good condition on the
inside of the liftgate upper trim panel (3).
2. Position the upper trim panel over the inside of the liftgate (6).
3. Align the two locator pins (2) on the back of the trim panel to the locator holes (1) on the inside of the liftgate.
4. Using hand pressure, press firmly and evenly on the trim panel over each of the eight push-in plastic fastener
locations until the fasteners are fully engaged in the holes on the inside of the liftgate.
5. Install and tighten the two screws (6) that secure the lower corners of the upper trim panel to the inside of the
liftgate. Tighten the screws to 2 N·m (16 in. lbs.).
6. Reinstall the lower trim panel onto the inside of the liftgate. (Refer to 23 - BODY/DECKLID/HATCH/LIFTGATE/
TAILGATE/TRIM PANEL/LOWER - INSTALLATION).
7. Close the liftgate.
LX
LIFTGATE
23 - 221
PAINT
TABLE OF CONTENTS
page
page
PAINT
SPECIFICATIONS - PAINT CODES . . . . . . . . . . . . 223
BASE COAT/CLEAR COAT FINISH
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
FINESSE SANDING/BUFFING & POLISHING
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
PAINT CODE
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
PAINT TOUCH-UP
23 - 222
PAINT
LX
PAINT
SPECIFICATIONS - PAINT CODES
EXTERIOR COLORS
EXTERIOR COLOR
DAIMLERCHRYSLER CODE
Brilliant Black Pearlcoat
AXR
Bright Silver Metallic Clearcoat
WS2
Stone White Clearcoat
SW1
Timberline Green Pearlcoat
AGW
Inferno Red Crystal Pearlcoat
ARH
Linen Gold Metallic Pearlcoat
CYG
Magnesium Pearlcoat
BPK
Midnight Blue Pearlcoat
BB8
Mineral Gray Metallic Clearcoat
CDM
Satin Jade Pearlcoat
AP4
Michigan State Blue Clearcoat
PY8999
Cool Vanilla
XWG
Silver Steel Metallic
DA4
Go Mango Clearcoat
AVE
Top Banana Clearcoat
VYH
Plum Crazy Clearcoat
FHG
Navy Blue Clear Coat
PY9326
Cream Clearcoat
PY6672
High Performance Red
ZR3
INTERIOR COLORS
INTERIOR COLOR
DAIMLERCHRYSLER CODE
D = Dark Slate Gray /Medium Slate Grey
DD
P= Deep Jade/ LIght Greystone
P1
T = Deep Slate Gray/ Light Greystone
D1
LX
PAINT
23 - 223
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст