Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 2139
INSTALLATION
1. Position the headlamp mounting crossmember (1)
into the engine compartment.
2. Loosely install the bolts (2 and 3) that secure the
headlamp mounting crossmember to the front fend-
ers.
3. Loosely install the bolts (4) that secure the head-
lamp mounting crossmember to the front frame
rails (5).
4. Align the headlamp mounting crossmember using
the alignment marks previously indicated and
tighten all of the retaining bolts to 28 N·m (21 ft.
lbs.).
5. Install the bolts (2) that secure the radiator mount-
ing bracket (1) to the headlamp mounting cross-
member. Tighten the bolts to 5 N·m (45 in. lbs.).
6. Position the latch (2) to the front of the crossmem-
ber (1).
7. Loosely install the two bolts (3) that secure the
hood latch to the headlamp mounting crossmem-
ber.
8. Align the hood latch using the alignment marks
previously indicated and tighten the hood latch
bolts to 28 N·m (21 ft. lbs. ).
23 - 104
EXTERIOR
LX
9. Install the horns onto the headlamp mounting
crossmember. Tighten the bolts to 28 N·m (21 ft.
lbs. ).
10. Connect the headlamp wire harness to the horns.
11. Install the headlamp units (1) (Refer to 8 - ELEC-
TRICAL/LAMPS/LIGHTING - EXTERIOR/HEAD-
LAMP UNIT - INSTALLATION).
12. Install the front fascia (Refer to 13 - FRAME &
BUMPERS/BUMPERS/FRONT FASCIA - INSTAL-
LATION).
13. Reconnect the negative battery cable.
14. Carefully close the hood and verify hood latch and
panel alignment. Adjust as necessary.
LX
EXTERIOR
23 - 105
SHIELD-WHEELHOUSE - FRONT
REMOVAL
1. Raise and support the vehicle.
2. Remove the wheels from the side of the vehicle
being serviced (Refer to 22 - TIRES/WHEELS -
REMOVAL).
3. Remove the body side cladding from the side of
the vehicle being serviced (Refer to 23 - BODY/EX-
TERIOR/BODY SIDE CLADDING - REMOVAL).
4. Remove the push-pins (1) that secure the lower
front wheelhouse shield (3) to the front wheelhouse
shield (3) and the body.
5. Remove lower front wheelhouse shield from the
vehicle.
6. Remove the front belly pan (Refer to 23 - BODY/
EXTERIOR/BELLY PAN - REMOVAL).
7. Remove the push-pins (2) that secure the front
wheelhouse shield (1) to the body.
8. Remove the front wheelhouse shield from the
vehicle.
23 - 106
EXTERIOR
LX
INSTALLATION
1. Position the front wheelhouse shield (1) into the
front fenderwell.
2. Install the push-pin (2) that secure the front wheel-
house shield to the body.
3. Install the front belly pan (Refer to 23 - BODY/EX-
TERIOR/BELLY PAN - INSTALLATION).
4. Position the lower front wheelhouse shield (3) onto
the body.
5. Install the push-pins (1) that secure the lower front
wheelhouse shield to the front wheelhouse shield
(2) and the body.
6. Install the body side cladding (Refer to 23 - BODY/
EXTERIOR/BODY SIDE CLADDING - INSTALLA-
TION).
7. Install the front wheels (Refer to 22 - TIRES/
WHEELS - INSTALLATION).
8. Lower the vehicle.
LX
EXTERIOR
23 - 107
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст