Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 2137
PANEL-COWL TOP
REMOVAL
1. Remove the two push pins (2) that secure the front
cowl top panel (1) to the right rear corner of the
engine compartment
2. Remove the front cowl top panel.
3. Remove the windshield wiper arms (Refer to 8 -
ELECTRICAL/WIPERS/WASHERS/WIPER ARMS -
REMOVAL).
4. Remove the push-pin (2) that secures each end of
the cowl top panel (1) to each front fender (7).
5. Disengage the two 1/4-turn fasteners (3) that
secure the cowl top panel to the dash panel (5).
6. Remove the six push-pins (4) that secure the cowl
top panel to the strut tower support (6).
7. Disengage the integral retaining clips that secure
the cowl top panel to the dash panel and remove
the cowl panel from the engine compartment.
23 - 96
EXTERIOR
LX
INSTALLATION
1. Position the cowl top panel (1) into the engine
compartment.
2. Engage the integral retaining clips that secure the
cowl top panel to the dash panel (5).
3. Install the six push-pins (4) that secure the cowl
top panel to the strut tower support (6).
4. Engage the 1/4-turn fasteners (3) that secure cowl
top panel to the dash panel.
5. Install the push-pin (2) that secures each end of
the cowl top panel to each front fender (7).
6. Install the windshield wiper arms (Refer to 8 -
ELECTRICAL/WIPERS/WASHERS/WIPER ARMS -
INSTALLATION).
7. Position the front cowl top panel (1) to the right
rear corner of the engine compartment.
8. Install the two push-pins (2) that secure the front
cowl top panel.
LX
EXTERIOR
23 - 97
GRILLE
REMOVAL
NOTE: Take the proper precautions to protect the
face of the front fascia from cosmetic damage.
1. Remove the front fascia (1) and place it on a work-
bench (Refer to 13 - FRAME & BUMPERS/
BUMPERS/FRONT FASCIA - REMOVAL).
2. Remove the screws (2) that secure the grille (3) to
the inside of the front fascia.
3. Remove the grille from the front fascia.
INSTALLATION
1. Position the grille into the front fascia.
2. Install the screws that secure the grille to the front
fascia. Tighten the screws securely.
3. Install the front fascia (Refer to 13 - FRAME &
BUMPERS/BUMPERS/FRONT
FASCIA
-
INSTALLATION).
23 - 98
EXTERIOR
LX
RACK-LUGGAGE
REMOVAL
1. If equipped, remove the luggage rack crossbars
(Refer to 23 - BODY/EXTERIOR/LUGGAGE RACK
CROSSBAR - REMOVAL).
2. Remove the end caps (1) from the luggage rack
bars (2) by gently prying up on the end cap to dis-
engage the two integral retainers (3).
3. Remove the two nuts (1) that secure each end of
the luggage rack crossbars (2) to the top of the
vehicle.
4. Remove the luggage rack crossbars from the top of
the vehicle.
INSTALLATION
1. Position the luggage rack crossbars (2) onto the
top of the vehicle.
2. Install the two nuts (1) that secure each end of the
luggage rack crossbars to the top of the vehicle.
Tighten the nuts to 7 N·m (60 in. lbs.).
LX
EXTERIOR
23 - 99
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст