Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1851
5.7L/6.1L
1. Disconnect and isolate battery negative cable (2)
from battery post.
2. Siphon power steering fluid from pump reservoir.
3. Remove air cleaner housing and inlet tube to throt-
tle body. (Refer to 9 - ENGINE/AIR INTAKE SYS-
TEM/AIR CLEANER HOUSING - REMOVAL)
4. Remove serpentine drive belt. (Refer to 7 - COOL-
ING/ACCESSORY
DRIVE/DRIVE
BELTS
-
REMOVAL)
5. Remove hose clamp, then supply hose (3) from
pump (1).
19 - 222
PUMP
LX
6. Unthread tube nut, then remove pressure hose (2)
from pump (1).
7. Remove three pump mounting bolts (2) through
access holes in pulley.
8. Remove pump (1) from engine.
9. If pulley needs removal, (Refer to 19 - STEERING/
PUMP/PULLEY - REMOVAL).
LX
PUMP
19 - 223
3.0L DIESEL
1. Disconnect and isolate battery negative cable (2)
from battery post.
2. Remove engine cover.
3. Remove air cleaner housing and inlet tube to throttle body. (Refer to 9 - ENGINE/AIR INTAKE SYSTEM/AIR
CLEANER HOUSING - REMOVAL)
4. Remove turbocharger inlet tube.
5. Remove intercooler tube resonator.
6. Remove serpentine drive belt. (Refer to 7 - COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL)
7. Siphon power steering fluid from pump reservoir. Place something below pump on belly pan to catch any fluid
that spills during removal.
8. Remove hose clamp (2), then supply hose (3) from
pump (1).
19 - 224
PUMP
LX
9. Unthread tube nut (2), then remove pressure hose
from pump (1).
10. Loosen, but do not remove, two pump mounting
bolts (1) through access holes in pulley.
11. Loosen, but do not remove, two mounting bolts (4)
fastening front pump mounting bracket (1) to
engine.
LX
PUMP
19 - 225
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст