Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 413
8. Connect the battery negative cable (3).
9. Install the spare tire cover.
8F - 38
BATTERY SYSTEM
LX
BATTERY TRAY
REMOVAL
1. Remove the battery, (Refer to 8 - ELECTRICAL/BATTERY SYSTEM/BATTERY - REMOVAL).
2. Using a small flat bladed tool, gently release the
two mounting tabs that secure the Power Distribu-
tion Center (PDC) to the battery tray. Position the
PDC aside.
3. Remove the battery tray mounting fasteners and
remove the battery tray from the vehicle.
LX
BATTERY SYSTEM
8F - 39
INSTALLATION
1. Position the battery tray in the vehicle and install
the mounting fasteners.
2. Position the Power Distribution Center (PDC) onto
the battery tray mounting tabs. Gently apply down-
ward pressure on the PDC until it snaps into place.
3. Install the battery, (Refer to 8 - ELECTRICAL/BATTERY SYSTEM/BATTERY - INSTALLATION).
8F - 40
BATTERY SYSTEM
LX
CHARGING
TABLE OF CONTENTS
page
page
CHARGING
ON-BOARD DIAGNOSTIC SYSTEM . . . . . . . . . . . 43
TORQUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
GENERATOR
VOLTAGE REGULATOR
LX
CHARGING
8F - 41
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст