Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 412
1. One at a time, secure the battery positive cable to
the routing clips located in the rear seat area.
2. One at a time, secure the battery positive cable to
the routing clips located in the rear compartment
area.
3. Position the carpet back to the normal position.
4. Install the right, B - pillar lower trim panel, (Refer to 23 - BODY/INTERIOR/B-PILLAR TRIM - INSTALLATION).
5. Install the right, front and rear door sill trim panels.
6. Install the right, rear seat cushion. Engage retainer loops into cup on floor kick up. Push downward at forward
edge at each retainer loop of the rear seat cushion to engage retainers.
7. Install the right, front seat, (Refer to 23 - BODY/SEATS/SEAT - INSTALLATION).
8F - 34
BATTERY SYSTEM
LX
8. Install the battery positive cable to rear Power Dis-
tribution Center (PDC) fastener (3).
9. Install the PDC cover (5).
10. Connect the battery positive cable (1).
11. Connect the battery negative cable (3).
12. Install the spare tire cover.
POSITIVE - ENGINE COMPARTMENT
1. Position the battery positive cable in the engine
compartment.
LX
BATTERY SYSTEM
8F - 35
2. On the 2.7L and 3.5L secure the battery positive
cable to the routing clips located at the back of the
engine.
3. On the 5.7L secure the battery positive cable to the
routing clip located at the back of the starter.
8F - 36
BATTERY SYSTEM
LX
4. Install the battery positive cable to starter fastener.
5. Install the battery positive cable to bulkhead
fastener.
6. Install the right front wheelhouse splash shield, (Refer to 23 - BODY/EXTERIOR/RF WHEELHOUSE SPLASH
SHIELD - INSTALLATION).
7. Lower vehicle.
LX
BATTERY SYSTEM
8F - 37
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст