Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1504
FILTER-OIL
REMOVAL
1. Raise vehicle on hoist.
2. Remove lower splash shield retaining bolts (1) and
splash shield (2).
3. Position a suitable collecting container under oil fil-
ter (3) location.
4. Remove oil filter (3) using a suitable oil filter
wrench. Dispose of oil filter (3) following enviro-
mental guidelines.
9 - 2040
ENGINE - 2.7L DOHC - SERVICE INFORMATION
LX
INSTALLATION
1. Wipe filter base clean, then inspect gasket sealing
surface.
2. Lubricate gasket of new filter with clean engine oil.
3. Install oil filter (3) and tighten to 16 N·m (9 ft. lbs.)
of torque after gasket contacts base. Use filter
wrench if necessary.
4. Install lower splash shield (2) and retaining bolts
(1).
LX
ENGINE - 2.7L DOHC - SERVICE INFORMATION
9 - 2041
5. Fill crankcase with proper engine oil to correct
level. Start engine and check for leaks.
6. Check engine oil level on dipstick (4) and fill as
needed (5).
9 - 2042
ENGINE - 2.7L DOHC - SERVICE INFORMATION
LX
PAN-OIL
REMOVAL
1. Disconnect negative battery cable (1) located in
trunk.
2. Remove engine oil indicator (4).
3. Raise vehicle on hoist.
LX
ENGINE - 2.7L DOHC - SERVICE INFORMATION
9 - 2043
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст