Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 813
5. Remove the two retaining bolts (1 and 4) and
remove wiper module (3) from vehicle.
INSTALLATION
1. Inspect the grommet (1) that the wiper motor sits
in. If cracked, brittle, or damaged, replace the
grommet (1).
2. While positioning the wiper module in its mounting
location, make sure that the dowel on the bottom of
the wiper motor (1) slides into the mounting grom-
met (2) correctly.
8R - 72
WIPERS/WASHERS - SERVICE INFORMATION
LX
3. Install the two retaining bolts (1 and 4). Torque
bolts to 8 N·m (70 in. lbs.).
4. Connect the wiper motor electrical connector (1).
5. Install the cowl panel (1) (Refer to 23 - BODY/EX-
TERIOR/COWL GRILLE - INSTALLATION).
LX
WIPERS/WASHERS - SERVICE INFORMATION
8R - 73
6. Install the wiper arms (1) and (2) (Refer to 8 -
ELECTRICAL/WIPERS/WASHERS/WIPER ARMS -
INSTALLATION). Torque nuts to 18 N·m (150 in.
lbs.).
7. Connect the battery negative cable.
8R - 74
WIPERS/WASHERS - SERVICE INFORMATION
LX
FRONT WIPER MOTOR
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the front wiper module (3) (Refer to 8 -
ELECTRICAL/WIPERS/WASHERS/WIPER
MOD-
ULE - REMOVAL).
3. With front wiper module on bench or in vise,
remove the one nut attaching the bellcrank to the
motor shaft.
LX
WIPERS/WASHERS - SERVICE INFORMATION
8R - 75
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст