Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 814
4. Using a flat bladed tool, carefully pry the bellcrank
from the wiper motor shaft.
5. Separate the bellcrank from the wiper motor shaft.
6. Remove the two motor mounting bolts (1).
8R - 76
WIPERS/WASHERS - SERVICE INFORMATION
LX
NOTE: When separating the motor from the link-
age, there are two pocket nuts that may fall out.
Take care to keep these and reinstall them during
installation.
7. Separate
the
wiper
motor
from
the
wiper
module/linkage.
INSTALLATION
1. Ensure that the shaft seal (3) is on the new motor
shaft. If necessary, transfer the one on the old
motor. If transferred, make sure the seal is in good
shape (not brittle, free from cracks, and not
damaged).
2. Ensure that the pocket nuts (1) are in place in the
motor before assembly.
LX
WIPERS/WASHERS - SERVICE INFORMATION
8R - 77
3. If needed to install pocket nut (1), align the nut with
the pocket.
4. Drop nut (1) into pocket.
5. Place wiper motor in its mounting location making
sure that the pocket nuts are in place.
8R - 78
WIPERS/WASHERS - SERVICE INFORMATION
LX
6. Install and tighten the mounting bolts (1).
7. Position the bellcrank on the wiper motor shaft.
8. Align the bellcrank with the linkage arms.
LX
WIPERS/WASHERS - SERVICE INFORMATION
8R - 79
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст