Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1680
OIL
DESCRIPTION
Refer to the Lube and Maintenance section for oil specifications (Refer to LUBRICATION & MAINTENANCE/FLUID
TYPES - DESCRIPTION).
9 - 2744
ENGINE - 3.0L TD SERVICE INFORMATION
LX
OIL FILTER
REMOVAL
1. Using 9551 Oil Filter Socket, unscrew the oil filter
cap.
2. Remove clean and inspect cap gasket, replace as
necessary.
3. Remove and discard the oil filter.
INSTALLATION
1. Inspect oil filter cap gasket, lubricate with clean
engine oil.
2. Install oil filter.
3. Screw oil filter cap to housing and tighten to 25
N·m (18 lbs. ft.) using 9551 Oil Filter Socket. Adjust
oil level as necessary.
LX
ENGINE - 3.0L TD SERVICE INFORMATION
9 - 2745
OIL PAN
REMOVAL
REMOVAL
1. Disconnect negative battery cable. (Refer to 8 -
ELECTRICAL/BATTERY
SYSTEM/CABLES
-
REMOVAL)
2. Remove the accessory belt.
3. Remove the A/C compressor and position aside.
4. Remove the lower oil pan. (Refer to 9 - ENGINE/
LUBRICATION/OIL PAN - REMOVAL)
5. Remove the transmission. (Refer to 21 - TRANS-
MISSION/TRANSAXLE/AUTOMATIC
-
NAG1
-
REMOVAL)
6. Remove the flex plate. (Refer to 9 - ENGINE/EN-
GINE BLOCK/FLEX PLATE - REMOVAL)
7. Remove the 5 bolts on the bottom of the rear main
seal carrier.
9 - 2746
ENGINE - 3.0L TD SERVICE INFORMATION
LX
8. Disconnect the oil level sensor wiring harness con-
nector.
9. Remove the oil pickup tube.
10. Remove oil pan bolts.
11. Remove the oil pan.
OIL PAN - LOWER
1. Disconnect negative battery cable. (Refer to 8 -
ELECTRICAL/BATTERY
SYSTEM/CABLES
-
REMOVAL)
2. Remove the oil level indicator tube (2) bolt, and
position the oil level indicator aside.
3. Raise and support the vehicle.
4. Remove the skid plate
5. Drain the oil.
6. Remove the steering gear mounting bolts (1).
LX
ENGINE - 3.0L TD SERVICE INFORMATION
9 - 2747
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст