Chrysler New Yorker. Manual — part 294
Fig. 152 Remove One UD Clutch Disc
Fig. 153 UD Clutch Flat Snap Ring
Fig. 154 Underdrive Clutch Pack
Fig. 155 UD Spring Retainer Snap Ring
Fig. 156 UD Return Spring and Retainer
Fig. 157 Underdrive Clutch Piston
300M
TRANSAXLE
21 - 49
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 158 Input Hub Tapered Snap Ring
Fig. 159 Tap on Input Hub
Fig. 160 Input Hub Removed
Fig. 161 Pull Retainer from Piston
Fig. 162 Remove Snap Ring
Fig. 163 Snap Ring and Return Spring
21 - 50
TRANSAXLE
300M
DISASSEMBLY AND ASSEMBLY (Continued)
ASSEMBLY
Use petrolatum on all seals to ease assembly of
components.
Fig. 164 Remove Input Shaft Snap Ring
Fig. 165 Remove Input Shaft
Fig. 166 Install Input Shaft
Fig. 167 Install Input Shaft Snap Ring
Fig. 168 Return Spring and Snap Ring
Fig. 169 Install Snap Ring
300M
TRANSAXLE
21 - 51
DISASSEMBLY AND ASSEMBLY (Continued)
NOTE: The OD/UD Reaction Plate, Snap Rings, and
Input Clutches Retainer is not interchangeable with
previous year 42LE components. The snap rings
are thicker and the position of the ring lands have
changed.
CAUTION: Compress return spring just enough to
remove or install snap ring.
The OD/UD clutches reaction plate has a step on
both sides. Install the OD/UD clutches reaction plate
tapered step side up.
NOTE: Snap ring ends must be located within one
finger of the input clutch hub. Be sure that snap
ring is fully seated, by pushing with screwdriver,
into snap ring groove all the way around.
Fig. 170 Install OD/Reverse Piston
Fig. 171 Install Input Shaft Hub Assembly
Fig. 172 Install Input Hub Tapered Snap Ring
Fig. 173 Underdrive Clutch Piston
Fig. 174 Seal Compressor Special Tool 5067
21 - 52
TRANSAXLE
300M
DISASSEMBLY AND ASSEMBLY (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст