Chrysler Crossfire. Manual — part 891
2. Pull down on the lower liftgate trim panel (1) to
release it from the liftgate.
UPPER LIFTGATE TRIM PANEL
1. Remove the lower trim panel. Refer to Lower Lift-
gate Trim Panel.
2. Remove the two screws (1) attaching the upper lift-
gate trim panel (2) to the liftgate.
3. Pull down on the upper liftgate trim panel (2) to
release it from the liftgate.
ZH
DECKLID/LIFTGATE
23 - 235
REMOVAL - ROADSTER
1. Remove the decklid trim fasteners (2).
2. Disconnect the emergency release cable (3) and
remove from the trim panel (1).
INSTALLATION
INSTALLATION - COUPE
UPPER LIFTGATE TRIM PANEL
1. Push up on the upper liftgate trim panel (2) to
attach it to the liftgate.
2. Install the two screws (1) attaching the upper lift-
gate trim panel (2) to the liftgate.
3. Install the lower trim panel. Refer to Lower Liftgate
Trim Panel.
23 - 236
DECKLID/LIFTGATE
ZH
LOWER LIFTGATE TRIM PANEL
1. Push on the lower liftgate trim panel (1) to attach
the retainers to the liftgate.
2. Install the handle trim screw (1).
ZH
DECKLID/LIFTGATE
23 - 237
INSTALLATION - ROADSTER
1. Install the emergency release handle (3) into the
trim panel (1).
2. Connect the emergency release cable and install
the trim panel (1) to the decklid using the fasteners
(2).
BUMPER
REMOVAL
1. Open the liftgate.
2. Remove the bolt (1) attaching the bumper to the
liftgate.
INSTALLATION
1. Position the bumper, then install the bolt attaching the bumper to the liftgate. Do not tighten the bolt at this time.
2. Close the liftgate and align it with the quarter panels. (Refer to 23 - BODY/BODY STRUCTURE/GAP AND
FLUSH - SPECIFICATIONS).
3. Tighten the liftgate bumper bolt.
23 - 238
DECKLID/LIFTGATE
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст