Chrysler Crossfire. Manual — part 141
2. Relocate the accessory drive belt away from the
idler pulley (4).
3. Remove the idler pulley bolt cover (1).
4. Remove the bolt (1) and the idler pulley (2) from
the engine.
5. Check the pulley bearing for any wear, looseness
or noise. Replace if necessary.
ZH
ACCESSORY DRIVE
7 - 99
REMOVAL - IDLER PULLEY (SRT)
Note: A small dowel rod can be inserted into the
accessory drive belt tensioner to hold the ten-
sioner in place while performing repairs.
1. Rotate the belt tensioner counterclockwise and
release the tension on the accessory drive belt.
2. Slide the accessory drive belt away from the idler
pulley (8).
7 - 100
ACCESSORY DRIVE
ZH
3. Remove the bolt (1) and the idler pulley from the
engine.
4. Check the pulley bearing for looseness and noise.
Replace if necessary.
REMOVAL - SUPERCHARGER IDLER (SRT)
1. Remove the engine cover (1). Grasp both corners
of the engine cover and pull up firmly.
ZH
ACCESSORY DRIVE
7 - 101
2. Remove the air tube assembly (1) by removing the
retaining bolts (2).
3. Release the tension on the accessory drive belt.
4. Remove the supercharger idler pulley retainer bolts
(1) and (2) and the pulley assembly.
7 - 102
ACCESSORY DRIVE
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст