Chrysler Crossfire. Manual — part 921
8. Remove the screw (4) located behind the left air
outlet deflector by removing the deflector to reveal
the screw.
9. Open the glove compartment and remove the
screws (1) attaching it the top section of the I/P.
10. Remove the defroster grille screws (1) and the
defroster grille pulling it outwards.
11. Remove the bolts on left and right under the
defroster grille.
CAUTION: Damage to the top section of I/P can
occur if the A-pillar sheet metal clips were not
removed.
12. Lift the top section of the I/P and remove toward
rear.
13. Lay the top section of I/P down on a suitable
surface.
ZH
INSTRUMENT PANEL
23 - 355
REMOVAL - LOWER I/P PANEL LEFT
1. Remove the air nozzle and the screw behind the
nozzle.
2. Remove the screw (3) attaching the cover under
the steering column then remove the cover (2).
3. Remove the fuse panel cover.
4. Remove the screws (1) attaching the lower instru-
ment cover (5) to the illumination control module
(4) and the side of the instrument panel to the sup-
port bar (6). Remove the screw at the top of lower
cover to cluster cover.
5. Remove the illumination control module (7).
6. Pull the lower instrument cover (2) off of the cluster
cover.
7. Remove the screw (2) attaching the hood latch
release handle bezel to the lower instrument panel
and then guide the handle through the lower cover
(1).
23 - 356
INSTRUMENT PANEL
ZH
8. Separate the lower panel (2) from the cluster cover
(1) and then remove the lower instrument panel.
REMOVAL - LEFT I/P PANEL - RHD
1. Remove the air outlet deflector from the I/P then
remove the screw (4) from behind the deflector.
2. Open the glove compartment and disconnect the
shock and the limiter strap from the door of the
glove compartment.
3. Remove the screws from the hinge of the glove
compartment door removing the glove compart-
ment from the vehicle.
4. Remove the screws (1, 2 and 3).
ZH
INSTRUMENT PANEL
23 - 357
5. Remove the I/P side cover.
6. Remove the screw (1) attaching the lower I/P to the
upper panel.
7. Remove the two screws (2) from the lower panel
then remove the lower I/P from the vehicle.
23 - 358
INSTRUMENT PANEL
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст