Chrysler Crossfire. Manual — part 969
FOLDING TOP COVER
REMOVAL
1. Disconnect the negative battery cable.
2. Manually lower the convertible top (3) into the
cargo compartment.(Refer to 23 - BODY/CON-
VERTIBLE TOP - STANDARD PROCEDURE).
3. Secure the tonneau cover (2) in the upright posi-
tion.
4. Remove the front cover retaining screws (1) and
retainer (4).
5. Remove the left and right front side weather strips
(1) (right side shown, left side similar).
ZH
CONVERTIBLE TOP
23 - 547
6. Remove the cover to front bow retaining screws on
the left and right side (1) (left side shown, right side
similar).
7. Manually place the top assembly in the upright
position.
8. Remove the top cover from the front bow and fold
back to gain access to the front cover retaining
strap rivets (1).
9. Drill out the front cover retaining strap rivets (1)
(one on each side).
23 - 548
CONVERTIBLE TOP
ZH
10. Disconnect the right and left cover support cables
(2) from the front bow (left side shown, right side
similar).
11. Remove the right and left top support cable (1)
from the cover (2) (left side shown, right side
similar).
ZH
CONVERTIBLE TOP
23 - 549
12. Remove the right and left rear weather strip (1)
from the cover side retainer (left side shown, right
side similar).
13. Drill out the right and left cover side retaining riv-
ets (1) (left side shown, right side similar).
14. Release the cover side retainers from the rear
bow support by sliding the cover down and then
out.
23 - 550
CONVERTIBLE TOP
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст