Chrysler Crossfire. Manual — part 970
15. Fold the side of the cover (1) up to gain access to
the rear cover retaining straps (3).
16. Drill out the right and left rear cover retaining
strap rivets (2) (left side shown, right side similar).
17. Lift up the rear bow and disconnect the rear
defogger harness connectors (1).
ZH
CONVERTIBLE TOP
23 - 551
Note: Use caution when removing the weather
strip from the rear bow.
18. Remove the rear bow weather strip (2) from the
rear bow (1).
19. Remove the cover (1) from the rear bow (2).
23 - 552
CONVERTIBLE TOP
ZH
20. Fold the side of the cover (2) up to gain access to
the stay pad rivet (1).
21. Drill out the stay pad rivet (1) from either side of
the center bow and reposition the stay pad (3) so
the top cover can be removed.
Note: The cover must be removed from the side
that the stay pad rivet was removed from.
22. Remove the cover assembly (2) by sliding the top
cover off the remaining bows.
ZH
CONVERTIBLE TOP
23 - 553
INSTALLATION
Note: Use caution when sliding the top cover into
the center bows. Pull the cover into the bows
slowly to prevent tearing of the cover.
1. Align the cover supports with the two center bows.
Install the cover assembly (1) into the two center
bows and guide into the bows slowly. Pull the cover
assembly slowly until the cover supports are all the
way into the center bows.
2. Attach the cover stay strap (3) to the center bow
with a new rivet (1).
23 - 554
CONVERTIBLE TOP
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст