RAM 3500 Chassis Cab (2019 year). Manual — part 35

556 MULTIMEDIA

Regulatory And Safety Information

USA/CANADA
Exposure to Radio Frequency Radiation
The radiated output power of the internal wireless radio is

far below the FCC and IC radio frequency exposure limits.

Nevertheless, the wireless radio will be used in such a

manner that the radio is 8 in (20 cm) or further from the

human body.
The internal wireless radio operates within guidelines found

in radio frequency safety standards and recommendations,

which reflect the consensus of the scientific community.
The radio manufacturer believes the internal wireless radio

is safe for use by consumers. The level of energy emitted is

far less than the electromagnetic energy emitted by wireless

devices such as mobile phones. However, the use of wireless

radios may be restricted in some situations or environments,

such as aboard airplanes. If you are unsure of restrictions,

you are encouraged to ask for authorization before turning

on the wireless radio.

The following regulatory statement applies to all Radio

Frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and with

Industry Canada license-exempt RSS standard(s). Operation

is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,

including interference that may cause undesired operation.

NOTE:

Changes or modifications not expressly approved by the

party responsible for compliance could void the user’s

authority to operate the equipment.

MULTIMEDIA

557

NOTE:
• This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation.

• If this equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the

following measures:
1. Increase the separation between the equipment and

receiver.

2. Consult an authorized dealer or an experienced radio

technician for help.

VOICE COMMANDS

Introducing Uconnect

Start using Uconnect Voice Recognition with these helpful

quick tips. It provides the key Voice Commands and tips you

need to know to control your Uconnect system.
If you see the NAV icon on the bottom bar, or in the Apps

menus, of your touchscreen, you have the Uconnect 4C NAV

With 8.4–inch Display or the Uconnect 4C NAV With

12–inch Display system. If not, you have a Uconnect 4C With

8.4–inch Display system.

Get Started

All you need to control your Uconnect system with your

voice are the buttons on your steering wheel.
1. Visit

UconnectPhone.com

to check mobile device and

feature compatibility and to find phone pairing instruc-

tions.

2. Reduce background noise. Wind noise and passenger

conversations are examples of noise that may impact

recognition.

9

558 MULTIMEDIA

3. Speak clearly at a normal pace and volume while facing

straight ahead. The microphone is located in the head-

liner and aimed at the driver.

4. Each time you give a Voice Command, you must first

push either the VR or Phone button, wait until after the

beep, then say your Voice Command.

5. You can interrupt the help message or system prompts by

pushing the VR or Phone button and saying a Voice

Command from current category.

Uconnect Voice Command Buttons

1 — Push To Begin Radio Or Media Functions

2 — Push To Initiate, Answer, End A Phone Call, Or Send/Receive A

Text

MULTIMEDIA

559

Basic Voice Commands

The basic Voice Commands below can be given at any point

while using your Uconnect system.
Push the VR button . After the beep, say:
• “Cancel” to stop a current voice session
• “Help” to hear a list of suggested Voice Commands
• “Repeat” to listen to the system prompts again

Notice the visual cues that inform you of your voice recogni-

tion system’s status. Cues appear on the top of the touch-

screen.

Uconnect 3.0

9

560 MULTIMEDIA

Uconnect 3 With 5–inch Display

Uconnect 4/4C/4C NAV With 8.4–inch Display

MULTIMEDIA

561

Uconnect 4C NAV With 12–inch Display

Radio

Use your voice to quickly get to the AM, FM or SiriusXM

Satellite Radio stations you would like to hear. (Subscription

or included SiriusXM Satellite Radio trial required.)
Push the VR button . After the beep, say:
• “Tune to ninety-five-point-five FM”
• “Tune to Satellite Channel Hits 1”

9

562 MULTIMEDIA

TIP:

At any time, if you are not sure of what to say or want to

learn a Voice Command, push the VR button and say

“Help.” The system provides you with a list of commands.

Uconnect 3.0

Uconnect 3 Radio

MULTIMEDIA

563

Uconnect 4/4C/4C NAV With 8.4–inch Display

Uconnect 4C NAV With 12–inch Display

9

564 MULTIMEDIA

Media

Uconnect offers connections via USB, Bluetooth and auxil-

iary ports (If Equipped). Voice operation is only available for

connected USB and AUX devices. (Remote CD player

optional and not available on all vehicles.)
Push the VR button . After the beep, say one of the

following commands and follow the prompts to switch your

media source or choose an artist.
• “Change source to Bluetooth”
• “Change source to AUX”
• “Change source to USB”
• “Play artist Beethoven”; “Play album Greatest Hits”;

“Play song Moonlight Sonata”; “Play genre Classical”

TIP:

Press the Browse button on the touchscreen to see all of the

music on your USB device. Your Voice Command must

match exactly how the artist, album, song and genre infor-

mation is displayed.

Uconnect 3.0

MULTIMEDIA

565

Uconnect 3 Media

Uconnect 4/4C/4C NAV With 8.4–inch Display

9

566 MULTIMEDIA

Uconnect 4C NAV With 12–inch Display

Phone

Making and answering hands-free phone calls is easy with

Uconnect. When the Phonebook button is illuminated on your

touchscreen, your system is ready. Check

UconnectPhone.com

for mobile phone compatibility and pairing instructions.
Push the Phone button . After the beep, say one of the

following commands:
• “Call John Smith”
• “Dial 123-456-7890 and follow the system prompts”
• “Redial (call previous outgoing phone number)”
• “Call back (call previous incoming phone number)”

MULTIMEDIA

567

TIP:

When providing a Voice Command, push the Phone button

and say “Call,” then pronounce the name exactly as it

appears in your phone book. When a contact has multiple

phone numbers, you can say “Call John Smith work.”

Uconnect 3.0

Uconnect 3 Phone

9

568 MULTIMEDIA

Uconnect 4/4C/4C NAV With 8.4–inch Display

Uconnect 4C NAV With 12–inch Display

MULTIMEDIA

569

Voice Text Reply — If Equipped

Uconnect announces incoming text messages. Push the VR

button or Phone button (if enabled) and say “Listen.”

(Must have compatible mobile phone paired to Uconnect

system.)
1. Once an incoming text message is read to you, push the

VR button or Phone button (if enabled). After the

beep, say: “Reply.”

2. Listen to the Uconnect prompts. After the beep, repeat

one of the pre-defined messages and follow the system

prompts.

NOTE:

Only use the numbering listed, otherwise the system does

not transpose the message.
TIP:

Your mobile phone must have the full implementation of the

Message Access Profile (MAP) to take advantage of this

feature. For details about MAP, visit

UconnectPhone.com

.

PRE-DEFINED VOICE TEXT REPLY RESPONSES

Yes.

Stuck in traffic.

See you later.

No.

Start without me.

I’ll be late.

Okay.

Where are you?

I will be 5 <or 10,

15, 20, 25, 30, 45,

60> minutes late.

Call me.

Are you there yet?

I’ll call you later. I need directions.

See you in 5 <or

10, 15, 20, 25, 30,

45, 60> minutes.

I’m on my way.

Can’t talk right

now.

I’m lost.

Thanks.

9

570 MULTIMEDIA

Apple iPhone iOS 6 or later supports reading incoming text

messages only. To enable this feature on your Apple iPhone,

follow these four simple steps:

iPhone Notification Settings

TIP:

Voice Text Reply is not compatible with iPhone, but if your

vehicle is equipped with Siri Eyes Free, you can use your

voice to send a text message.

Climate (4C/4C NAV)

Too hot? Too cold? Adjust vehicle temperatures hands-free

and keep everyone comfortable while you keep moving

ahead. (If vehicle is equipped with climate control.)
Push the VR button . After the beep, say one of the

following commands:
• “Set driver temperature to 70 degrees”
• “Set passenger temperature to 70 degrees”
TIP:

Voice Command for Climate may only be used to adjust the

interior temperature of your vehicle. Voice Command will

not work to adjust the heated seats or steering wheel if

equipped.

1 — Select “Settings”

2 — Select “Bluetooth”

3 — Select The (i) For The Paired Vehicle

4 — Turn On “Show Notifications”

MULTIMEDIA

571

Uconnect 4/4C/4C NAV With 8.4–inch Display Climate

Uconnect 4C NAV With 12–inch Display Climate

9