SsangYong Korando II (1996-2006 year). Manual — part 433
INSTRUMENTATION, DRIVER INFORMATION 9E-13
SSANGYONG MY2002
KAA9E130
KAA9E140
KAA9E150
3. Disconnect the electrical connector.
4. Remove the instrument lower cover.
5. Installation should follow the removal procedure
in the reverse order.
INSTRUMENT CLUSTER
Removal and Installation Procedure
1. Remove the instrument cluster trim panel. Refer
to “instrument cluster trim panel” in this section.
2. Remove the instrument cluster mounting screws
3. Disconnect the instrument cluster electrical
connector.
4. Installation should follow the removal procedure
in the reverse order.
KAA9E120
INSTRUMENT LOWER COVER
Removal and Installation Procedure
1. Remove the hood latch release handle. Refer to
“Hood Latch Release Handle” in this section.
2. Remove the screws from the instrument lower
cover.
INSTRUMENT CLUSTER TRIM
PANEL
Removal and Installation Procedure
1. Remove the instrument cluster trim panel with the
screws.
2. Installation should follow the removal procedure
in the reverse order.
SSANGYONG MY2002
9E-14 INSTRUMENTATION, DRIVER INFORMATION
KAA9E170
KAA9E180
KAA9E190
5. Remove the screws and the speedometer/
odometer/trip odometer/tachometer.
6. Installation should follow the removal procedure
in the reverse order.
FUEL GAUGE
Removal and Installation Procedure
1. Disconnect the negative battery cable.
2. R e m o v e t h e i n s t r u m e n t c l u s t e r . R e f e r t o
“Instrument Cluster” in this section.
3. Remove the screw of digital clock adjusting knob.
4. Remove the clips down and remove the instrument
cluster lens.
5. Remove the fuel gauge screws and the fuel gauge
from the cluster assembly
6. Installation should follow the removal procedure
in the reverse order.
KAA9E160
SPEEDOMETER/ODOMETER/TRIP
ODOMETER/TACHOMETER
Removal and Installation Procedure
1. Disconnect the negative battery cable.
2. R e m o v e t h e i n s t r u m e n t c l u s t e r . R e f e r t o
“Instrument Cluster” in this section.
3. Remove the screw of digital clock adjusting knob.
4. Press the clips down and remove the instrument
cluster lens.
INSTRUMENTATION, DRIVER INFORMATION 9E-15
SSANGYONG MY2002
KAA9E210
KAA9E220
DIGITAL CLOCK
Removal and Installation Procedure
1. Disconnect the negative battery cable.
2. R e m o v e t h e i n s t r u m e n t c l u s t e r . R e f e r t o
“Instrument Cluster” in this section.
3. Remove the screw of digital clock adjusting knob.
4. Press the clips down and remove the instrument
cluster lens.
5. Remove the digital clock from the cluster
assembly.
6. Installation should follow the removal procedure
in the reverse order.
KAA9E200
TEMPERATURE GAUGE
Removal and Installation Procedure
1. Disconnect the negative battery cable.
2. R e m o v e t h e i n s t r u m e n t c l u s t e r . R e f e r t o
“Instrument Cluster” in this section.
3. Remove the screw of digital clock adjusting knob.
4. Press the clips down and remove the instrument
cluster lens.
5. Remove the screws and the temperature gauge
from the cluster assembly.
6. Installation should follow the removal procedure
in the reverse order.
INSTRUMENT CLUSTER
INDICATOR LAMPS
Removal and Installation Procedure
1. Disconnect the negative battery cable.
2. R e m o v e t h e i n s t r u m e n t c l u s t e r . R e f e r t o
“Instrument Cluster” in this section.
3. Remove the defective bulb from the rear of the
cluster.
4. Installation should follow the removal procedure
in the reverse order.
SSANGYONG MY2002
9E-16 INSTRUMENTATION, DRIVER INFORMATION
KAA9E250
KAA9E250
7. Remove the stereo cassette. Refer to Section 9F,
Audio system.
8. Remove the cup holder. Refer to “Cup Holder” in
this section.
9. Remove the side facia panel. Refer to “Side Facia
Panel” in this section.
10. Remove the glove box. Refer to “Glove Box” in
this section.
11. Remove the instrument cluster trim panel. Refer
to “Instrument cluster trim panel” in this section.
12. R e m o v e t h e i n s t r u m e n t c l u s t e r . R e f e r t o
“Instrument Cluster” in this section.
13. Remove the screws and the instrument panel side
trim cover.
14. Remove the instrument lower cover with screws.
Refer to “Instrument Lower Cover” in this section.
15. Disconnect the steering column electrical
connector.
KAA9E240
INSTRUMENT PANEL
Removal and Installation Procedure
1. Disconnect the negative battery cable.
2. Remove the instrument panel defroster duct.
3. Remove the floor console. Refer to Section 9G,
Floor Console.
4. Remove the center tray. Refer to “Center tray” in
this section.
5. Remove the center facia. Refer to “Center Facia”
in this section.
6. Remove the automatic temperature control
assembly. Refer to Section 7D, Automatic
Temperature Control Assembly.
KAA9E230
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст