SsangYong Korando II (1996-2006 year). Manual — part 159
OM600 ENGINE MECHANICAL 1B3 -- 85
DAEWOO MY_2000
OM661LA Engine
3 Crankshaft Main Bearing Shells (Upper)
4 Thrust Bearings (Upper)
5 Crankshaft
6 Crankshaft Main Bearing Shells (Lower)
7 Thrust Bearings (Lower)
A Radial Bearings
B Radial and Axial Bearings (Thrust Bearing)
Notice
The gaps between the bearing shell and bore and
between the bearing shell and journal are different
each other. Refer to service data.
1B3 -- 86 OM600 ENGINE MECHANICAL
DAEWOO MY_2000
Crankshaft Standard and Repair Sizes
mm
Crankshaft bearing journal
diameter
Thrust bearing
journal width
Thrust bearing
journal diameter
Standard size
50 950 57 965
24.500 -- 24.533
47 950 47 965
Standard size
50.950 -- 57.965
24.600 -- 24.633
47.950 -- 47.965
Repair size 1
57.500 -- 57.715
24.700 -- 24.733
47.700 -- 47.715
Repair size 2
57.450 -- 57.465
24.900 -- 24.933
47.450 -- 47.650
Repair size 3
57.200 -- 57.215
25.000 -- 25.033
47.200 -- 47.215
Repair size 4
56.950 -- 56.965
--
46.950 -- 46.965
Bearing Clearances
mm
Thrust bearing
Crankshaft bearing
Radial clearance
New
0.027 -- 0.051
0.026 -- 0.068
Radial clearance
Limit
Max. 0.070
Max. 0.080
Axial clearances
New
0.100-- 0.254
--
Axial clearances
Limit
Max. 0.300
--
Matching Fit Bearing Journal Width to Thrust Bearings
mm
Fit bearing journal width
Thrust bearing thickness
24.500 -- 24.533
2.15
24.600 -- 24.633
2.20
24.700 -- 24.733
2.25
24.900 -- 24.933
2.35
25.000 -- 25.033
2.40
Notice
D
Measure crankshaft axial clearance and adjust with proper thrust Bearing.
D
The same thickness of washer must be installed on both sides of the fit bearing.
OM600 ENGINE MECHANICAL 1B3 -- 87
DAEWOO MY_2000
Matching Crankshaft Bearing Shells to Basic Bearing Bore in Crankshaft
Marking of basic bearing bore in lower
parting surface
Color code of relevant crankshaft
bearing shell
1 punch mark or blue
Blue or white--blue
2 punch marks or yellow
Yellow or white--yellow
3 punch marks or red
Red or white--red
Matching Crankshaft Bearing Shells to Basic Bearing Journal of Crankshaft
Marking of bearing journals on crank webs
Color code of relevant crankshaft
bearing shell
Blue or white--blue
Blue or white--blue
Yellow or white--blue
Yellow or white--yellow
Red or white--blue
Red or white--red
1B3 -- 88 OM600 ENGINE MECHANICAL
DAEWOO MY_2000
Removal & Installation Procedure
1. Remove the bearing cab bolt.
2. Remove the bearing caps (8).
Notice
The crankshaft bearing caps are marked with
stamped numbers. Remove the bearing cap from
the vibration damper side.
3. Remove the crankshaft bearing caps (9) and lower
thrust bearings (7).
4. Remove the lower thrust bearings (6) from the bear-
ing cap (9).
5. Remove the crankshaft (5).
6. Remove the upper thrust bearings(4).
7. Remove the upper bearing shells (3) from crank-
case.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст