SsangYong Korando II (1996-2006 year). Manual — part 186
OM600 ENGINE COOLING 1D3 -- 7
DAEWOO MY_2000
Removal & Installation Procedure
1. Loose the bolts(5) and remove the pulley (4).
Installation Notice
Tightening Torque
10 N∙m (89 lb-in)
2. Loose the bolts (3).
Installation Notice
Tightening Torque
10 N∙m (89 lb-in)
3. Pull the tensioning lever(1) to the arrow direction.
4. Remove the water pump(6).
Notice
Clean gasket residues on the sealing surface of wa-
ter pump and replace the gasket.
5. Installation should follow the removal procedure in
the reverse order.
1D3 -- 8 OM600 ENGINE COOLING
DAEWOO MY_2000
WATER PUMP HOUSING
Preceding Work :
Removal of water pump
Removal of thermostat
Removal of generator
1 Gasket
Replace
. . . . . . . . . . . . . . . . . . . . . . . . . .
2 Water Pump Housing
3 Connector
4 Bolt
10 N∙m (89 lb-in)
. . . . . . . . . . . . . . . . . . . . .
5 Coolant Hose
6 Return Pipe
7 O--Ring
8 Temperature Sensor
Notice
The bolt on the arrow should be installed last.
OM600 ENGINE COOLING 1D3 -- 9
DAEWOO MY_2000
Removal & Installation Procedure
1. Disconnect the connector(3).
2. Separate the coolant hose (5) and return pipe(6).
3. Remove the bolts(4) evenly.
Installation Notice
Tightening Torque
10 N∙m (89 lb-in)
Notice
Clean gasket residues on the sealing surface of wa-
ter pump and replace the gasket.
4. Remove the water pump housing(2).
5. Installation should follow the removal procedure in
the reverse order.
1D3 -- 10 OM600 ENGINE COOLING
DAEWOO MY_2000
COOLING FAN CLUTCH
1 Belt Pulley
2 Cooling Fan Clutch
3 Cooling Fan
4 Socket Bolt
45 N∙m (33 lb-ft)
. . . . . . . . . . . . . . .
5 Socket Bolt
10 N∙m (89 lb-in)
. . . . . . . . . . . . . . .
Tools Required
603 589 00 40 00 Counter Holder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст