SsangYong Korando II (1996-2006 year). Manual — part 219
SSAMGYONG MY2002
3A-12 FRONT AXLE
1 Axle Mounting Bracket
2 Breather Hose
3 Bolt (Rear)
4 Nut . . . . . . . 95 - 142 N•m (70 - 105 lb-ft)
5 Cross Member
6 Bolt (Front)
7 Bushing
8 Spacer
FRONT AXLE ASSEMBLY
9 Bushing
10 Nut . . . . . . . 95 - 142 N•m (70 - 105 lb-ft)
11 Front Axle Assembly
12 Nut . . . . . . . .. 70 - 80 N•m(52 - 59 lb-ft)
13 Bolt
14 Inner Axle Shaft (LH)
15 Inner Axle Shaft (RH)
Preceding Work : Removal of the front axle drive shaft
Removla of the steering gear box
KAA3A230
FRONT AXLE 3A-13
SSANGYONG MY2002
Tools Required
DW340-80
Front Axle Support
Removal and Installation Procedure
1. Raise and suitably support the vehicle.
2. Remove the lower cover.
Installation Notice
KAA3A240
KAA3A260
KAA3A250
5. Remove the front drive shaft-to-front axle
assemblybolts.
Installation Notice
Tightening Torque
4.5 - 6.0 kgf•m
3. Remove the rack and pinion assembly. Refer to
Section 6C, Power Steering Gear.
4. Remove the front axle bleeder hose.
Tightening Torque
35 N•m (26 lb-ft)
KAA3A270
6. Remove the front propeller shaft-to-front axle bolts.
Removal Notice
•
Make alignment marks on the front propeller
shaft and front axle housing.
Installation Notice
Tightening Torque
7.0 - 8.5 kgf•m
SSAMGYONG MY2002
3A-14 FRONT AXLE
Tightening Torque
118 N•m (87 lb-ft)
7. Remove the front axle housing mounting nuts from
the crossmember.
Installation Notice
KAA3A280
KAA3A300
KAA3A290
9. Support the front axle housing with front axle sup-
port DW340-080.
Tightening Torque
78 N•m (58 lb-f t )
8. Remove the lower ball joint using the ball joint re-
mover 661 589 13 33 00.
Installation Notice
10. Remove the front axle mounting bracket nuts.
Installation Notice
KAA3A310
Tightening Torque
9.5 - 14.2 kgf•m
FRONT AXLE 3A-15
SSANGYONG MY2002
11. Lowering the jack carefully, remove the front axle
assembly.
12. Installation should follow the removal procedure
in the reverse order.
KAA3A320
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст