SsangYong Korando II (1996-2006 year). Manual — part 141
OM600 ENGINE MECHANICAL 1B3 -- 13
DAEWOO MY_2000
Removal & Installation Procedure
1. Disconnect the negative terminal of battery.
2. Remove the hood.
3. Remove the skid plate.
Installation Notice
Tightening Torque
28--47 N∙m (21--35 lb-ft)
4. Remove the radiator drain cock and drain the cool-
ant.
Notice
Open the coolant reservoir tank cap.
5. Remove the drain plug (1) and seal (2) from the cyl-
inder block and drain the coolant completely.
6. After draining, replace the seal and reinstall the
drain plug.
Installation Notice
Tightening Torque
30 N∙m (22 lb-ft)
7. Disconnect the lower coolant hose from the radiator.
1B3 -- 14 OM600 ENGINE MECHANICAL
DAEWOO MY_2000
8. Disconnect the upper coolant hose from the radia-
tor.
9. Loosen the bolt and remove the coolant pipe and
cooling fan shroud.
Installation Notice
Tightening Torque
3 --7 N∙m (27--62 lb-in)
10. Remove the hoses (air intake to intercooler, inter-
cooler to intake duct).
11. Remove the pipes connected to intercooler.
OM600 ENGINE MECHANICAL 1B3 -- 15
DAEWOO MY_2000
12. Remove the hose(air cleaner to turbocharger) with
blow by hose.
13. Disconnect the air cleaner intake hose and remove
the air cleaner cover and element.
14. Disconnect the coolant hose from the water inlet.
15. Remove the air--conditioner lines from the compres-
sor.
Notice
Evacuate the refrigerant before removal.
1B3 -- 16 OM600 ENGINE MECHANICAL
DAEWOO MY_2000
16. Remove the power steering pump lines.
Notice
Completely drain the fluid.
17. Disconnect the fuel feed line with prefilter from the
feed pump on injection pump.
18. Vehicle with automatic transmission.
Remove the hydraulic lines (19, 20) from oil cooler
(2).
19. Disconnect the engine harness.
20. Disconnect the preheating time relay cable.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст