SsangYong Korando II (1996-2006 year). Manual — part 142
OM600 ENGINE MECHANICAL 1B3 -- 17
DAEWOO MY_2000
21. Remove the fuel lines from the fuel filter and cover
the filter with plug.
22. Disconnect the brake booster hose from vacuum
pump.
23. Disconnect the other vacuum lines.
24. Disconnect the ground cable.
25. Disconnect the generator wires.
26. Disconnect the starter motor wires and remove the
starter motor.
1B3 -- 18 OM600 ENGINE MECHANICAL
DAEWOO MY_2000
27. Disconnect the preheating time relay sensor plug.
28. Disconnect the coolant temperature sensor plug.
29. Disconnect the accelerator cable from the control
linkage.
Installation Notice
Tightening Torque
8 -- 18 N∙m (6 -- 13 lb-ft)
30. Loosen the connection of control pressure cable (an
arrow) used in auto transmisson.
OM600 ENGINE MECHANICAL 1B3 -- 19
DAEWOO MY_2000
31. Separate the exhaust pipe flange from the turbo
charger.
Installation Notice
Tightening Torque
30 N∙m (22 lb-ft)
32. Loosen the installing bolt of clutch release cylinder
and remove the clutch release cylinder.
Installation Notice
Tightening Torque
20--34 N∙m (15--25 lb-ft)
33. Disconnect the exhaust pipe flange from the ex-
haust manifold.
Installation Notice
Tightening Torque
30 N∙m (22 lb-ft)
34. Remove the propeller shaft from the transmission.
Installation Notice
Tightening Torque
Axle 70--80 N∙m
(52--59 lb-ft)
Tightening Torque
T/C 81--89 N∙m
(60--66 lb-ft)
35. Remove the shift control cable.
36. Remove the transmission.
1B3 -- 20 OM600 ENGINE MECHANICAL
DAEWOO MY_2000
37. Loosen the engine mounting bracket nut.
Installation Notice
Tightening Torque
50--75 N∙m (37--55 lb-ft)
38. Remove the engine assembly from the vehicle by
using a hoist or crane.
39. Installation should follow the removal procedure in
the reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст