SsangYong Korando II (1996-2006 year). Manual — part 102
M161 ENGINE COOLING 1D2 -- 11
DAEWOO MY_2000
THERMOSTAT
1 Bolt (M6 X 25, 3 pieces)
9--11 NSm (80--97 lb-in)
. . . . . . . . . . . . . . . . . . . . .
2 Thermostat Cover
3 De--aeration Hose
4 Coolant Outlet Hose
5 Thermostat
6 O--ring
Removal & Installation Procedure
1. Drain the coolant from the radiator.
2. Loosen the hose mounting clip and remove the cool-
ant hose (3, 4).
3. Unscrew the three bolts (1) and remove the thermo-
stat cover assembly from thermostat housing.
Installation Notice
Tightening Torque
9 -- 11 NSm (80 -- 97 lb-in)
Do not separate the thermostat cover and thermo-
stat.
4. Replace the O--ring if necessary.
5. Check the leakage in the cooling system.
1D2 -- 12 M161 ENGINE COOLING
DAEWOO MY_2000
THERMOSTAT HOUSING ASSEMBLY
Preceding Work: Removal of viscous clutch
1a Bolt (M6 X 95, 2 pieces)
9--11 NSm (80--97 lb-in)
. . . . . . . . . . . . . . . . . . . . .
1b Bolt (M8 X 75, 2 pieces)
22.5--27.5 NSm (16.6--20.3 lb-ft)
. . . . . . . . . . . . .
1c Bolt (M8 X 35, 1 piece)
22.5--27.5 NSm (16.6--20.3 lb-ft)
. . . . . . . . . . . . .
2 Thermostat Housing Assembly
3 O--ring
4 De--aeration Hose
5 Coolant Outlet Hose
6 Coolant Bypass Hose
7 Tensioning Device Shock Absorber
8 Engine Hanger Brocket
M161 ENGINE COOLING 1D2 -- 13
DAEWOO MY_2000
Removal & Installation Procedure
1. Drain the coolant.
2. Remove the de--aeration hose (4), coolant outlet
hose (5) and coolant bypass hose (6).
3. Disconnect the coolant temperature sensor connec-
tor.
4. Unscrew the bolt (1c) and pry off the tensioning de-
vice shock absorber (7).
Installation Notice
Tightening Torque
22.5 -- 27.5 NSm
(16.6 -- 20.3 lb-ft)
5. Unscrow the bolts (1a, 1b) and remove the engine
hanger bracket and thermostat housing.
Installation Notice
Tightening
(1a)
9 -- 11 NSm
(80 -- 97 lb-in)
Tightening
Torque
(1b)
22.5 -- 27.5 NSm
(16.6 -- 20.3 lb-ft)
6. Replace the O--ring with new one.
7. Installation should follow the removal procedure in
the reverse order.
8. Check for leaks in cooling system.
1D2 -- 14 M161 ENGINE COOLING
DAEWOO MY_2000
FAN SHROUD
Removal & Installation Procedure
1. Unscrew two bolts from cooling fan shroud and re-
move the shroud.
Installation Notice
Tightening Torque
3 -- 7 NSm (27 -- 62 lb-in)
2. Installation should follow the removal procedure in
the reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст