SsangYong Musso. Manual — part 229
REAR SUSPENSION 2D-3
HEATING
Check
Lack of Oil
Insufficient Backlash of Gears
Excessive Preload of Bearing
Action
Replenish
Adjust
Adjust
2D-4 REAR SUSPENSION
1 Spring Seat
2 Coil Spring
3 Lateral Rod
4 Shock Absorber
5 Upper Arm
6 Lower Arm
7 Connecting Link
8 Stabilizer Bar
COMPONENT LOCATOR
REAR SUSPENSION 2D-5
MAINTENANCE AND REPAIR
ON-VEHICLE SERIVCE
REAR SUSPENSION (5 - LINK)
1 Spring Seat
2 Coil Spring
3 Lateral Rod
4 Shock Absorber
5 Upper Arm
6 Lower Arm
7 Connecting Link
8 Stabilizer Bar
2D-6 REAR SUSPENSION
Removal & Installation Procedure
!
!
!
!
!
Stabilizer bar
1. Remove the upper nut of the connecting link.
Installation Notice
2. Remove the stabilizer bar cap fixing bolts (arrow) and
remove the stabilizer bar.
Installation Notice
Tightening Torque
16 - 22 Nm
Distance Between the Nut
end and the Screw end
10 - 13 mm
Tightening Torque
30 - 45 Nm
!
!
!
!
!
Lateral Rod
1. Remove the lateral rod fixing nut from the frame.
Notice
Completely press the coil springs.
Installation Notice
2. Remove the lateral rod fixing nut from the rear axle and
remove the lateral rod.
Installation Notice
Tightening Torque
150 - 180 Nm
Tightening Torque
150 - 180 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст