SsangYong Musso. Manual — part 28
9N-4 FRAME AND UNDERBODY
BODY MOUNTING-SECTIONAL VIEW
FRAME AND UNDERBODY 9N-5
1 Mounting Bolt . . . . . . . . . ... 28-47 Nm
SKID PLATE
.
2 Skid Plate
Removal & Installation Procedure
1. Remove 6 mounting bolts and carefully remove the skid
plate.
Installation Notice
2. Installation should follow the removal procedure in the
reverse order.
Tightening Torque
28 - 47 Nm
9O-4 BUMPERS AND FASCIAS
REAR BUMPER
Notice
Removal and installation is as shown in upper drawings.
SECTION 9P
DOORS
Caution: Disconnect the negative battery cable before removing or installing any electrical unit or when a
tool or equipment could easily come in contact with exposed electrical terminals. Disconnecting this cable
will help prevent personal injury and damage to the vehicle. The ignition must also be in LOCK unless otherwise
noted.
TABLE OF CONTENTS
Schematic and Routing Diagrams . . . . . . . . 9P-2
Power Window . . . . . . . . . . . . . . . . . . . . . . . . 9P-2
Maintenance and Repair . . . . . . . . . . . . . . . 9P-3
On-Vehicle Service . . . . . . . . . . . . . . . . . . . . . . 9P-3
Front Door . . . . . . . . . . . . . . . . . . . . . . . . . . . 9P-3
Rear Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9P-4
Tail Gate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9P-5
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст