SsangYong Musso. Manual — part 409
OM600 ENGINE COOLING 1D3-11
Removal & Installation Procedure
1. Hold the bolt pulley with counter holder and remove the
bolt(4).
Counter Holder 603 589 00 40 00
Installation Notice
Tightening Torque
45 Nm
2. Remove the socket bolt(5) and then remove the cooling
fan(3) and fan clutch(2).
Notice
Keep the fan clutch vertically.
Installation Notice
Tightening Torque
10 Nm
3. Installation should follow the removal procedure in the
reverse order.
1D3-12 OM600 ENGINE COOLING
RADIATOR
Preceding : Removal of cooling fan shroud
1 Radiator Inlet Hose . . . ... OM662LA : 220mm
. . . . . . . . . . . . OM661LA : 321mm
2 Radiator outlet Hose
3 Radiator Deaeration Tube & Hose
4 Clamp
5 Spring Clamp
6 Bolt . . . . . . . . . . . . . . .. 3-7 Nm
7 Radiator
8 Spring Clamp
9 Bolt . . . . . . . . . . . . . . ... 3-7Nm
OM600 ENGINE COOLING 1D3-13
Removal & Installation Procedure
1. Drain coolant from the radiator.
2. Remove the coolant thermoswich connector from radiator.
3. Remove the each coolant hose.
4. Remove the auto T/M oil cooling hose and cooling line.
Installation Notice
5. Loosen the radiator upper mounting bolt and remove the
mounting stopper and insulator.
6. Remove the radiator.
7. Check the radiator pin for crack, leakage and bending and
replace it if necessany.
8. Installation should follow the removal procedure in the
reverse order.
Tightening Torque
Hose : 29 - 40Nm
1D3-14 OM600 ENGINE COOLING
COOLING SUB-SYSTEM
1 Radiator
2 Cooling Fan Shroud
3 Bolt . . . . . . . . . . . . . . .. 3-7Nm
4 Cooling Fan Shroud
5 Radiator Deaieration Hose
7 Mounting Bracket
8 Make-up Cooling Hose
9 Bolt . . . . . . . . . . . . . . ... 3-7Nm
10 Cooling Reservoir-tank Cap
11 Cooling Reservoir-tank
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст