SsangYong Musso. Manual — part 408
OM600 ENGINE COOLING 1D3-7
Removal & Installation Procedure
1. Loose the bolts(5) and remove the pulley (4).
Installation Notice
Tightening Torque
10 Nm
2. Loose the bolts (3).
Installation Notice
Tightening Torque
10 Nm
3. Pull the tensioning lever(1) to the arrow direction.
4. Remove the coolant pump(6).
Notice
Clean gasket residues on the sealing surface of coolant
pump and replace the gasket.
5. Installation should follow the removal procedure in the
reverse order.
1D3-8 OM600 ENGINE COOLING
COOLANT PUMP HOUSING
Preceding Work : Removal of coolant pump
Removal of thermostat
Removal of alternator
1 Gasket . . . . . . . . . . . . ... Replace
2 Coolant Pump Housing
3 Connector
4 Bolt . . . . . . . . . . . . . . ... 10 Nm
5 Coolant Hose
6 Return Pipe
7 O-Ring
8 Temperature Sensor
Notice
The bolt on the arrow should be installed last.
OM600 ENGINE COOLING 1D3-9
Removal & Installation Procedure
1. Disconnect the connector(3).
2. Separate the coolant hose (5) and return pipe(6).
3. Remove the bolts(4) evenly.
Installation Notice
Tightening Torque
10 Nm
Notice
Clean gasket residues on the sealing surface of coolant
pump and replace the gasket.
4. Remove the coolant pump housing(2).
5. Installation should follow the removal procedure in the
reverse order.
1D3-10 OM600 ENGINE COOLING
COOLING FAN CLUTCH
1 Belt Pulley
2 Cooling Fan Clutch
3 Cooling Fan
4 Socket Bolt. . . . . . . . . . . . 45 Nm
5 Socket Bolt. . . . . . . . . . . . 10 Nm
Tools Required
603 589 00 40 00 Counter Holder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст