SsangYong Musso. Manual — part 364
1B3-18 OM600 ENGINE MECHANICAL
27. Disconnect the preheating time relay sensor plug.
28. Disconnect the coolant temperature sensor plug.
29. Disconnect the accelerator cable from the control linkage.
Installation Notice
Tightening Torque
8 - 18 Nm
30. Loosen the connection of control pressure cable (an arrow)
used in auto transmission.
OM600 ENGINE MECHANICAL 1B3-19
33. Disconnect the exhaust pipe flange from the exhaust
manifold.
Installation Notice
35. Remove the shift control cable.
36. Remove the transmission.
Tightening Torque
Axle 70 ~ 80 Nm
T/C 81 ~ 89 Nm
Tightening Torque
20 - 34 Nm
31. Separate the exhaust pipe flange from the turbo charger.
Installation Notice
32. Loosen the installing bolt of clutch release cylinder and
remove the clutch release cylinder.
Installation Notice
Tightening Torque
30 Nm
Tightening Torque
30 Nm
34. Remove the propeller shaft from the transmission.
Installation Notice
1B3-20 OM600 ENGINE MECHANICAL
37. Loosen the engine mounting bracket nut.
Installation Notice
38. Remove the engine assembly from the vehicle by using a
hoist or crane.
39. Installation should follow the removal procedure in the
reverse order.
Tightening Torque
50 - 75 Nm
OM600 ENGINE MECHANICAL 1B3-21
POLY V-BELT
1 Nut . . . . . . . . . . . . . . . . 23Nm
2 Tensioning Lever
3 Bolt
4 Spring
5 Tensioning Lever
6 Poly V-Belt
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст