SsangYong Musso. Manual — part 378
1B3-74 OM600 ENGINE MECHANICAL
VIBRATION DAMPER AND HUB
Preceding Work : Removal of the cooling fan
Removal of poly V-belt
1 Bolt . . . . . . . . . . . . . . . 10Nm
2 Cooling Fan Belt Pulley
3 Socket Bolt . . . . . . . . . . . . 23Nm
4 Crankshaft Belt Pulley
5 Vibration Damper
6 Bolt . . . . . . . . . . . . 200Nm + 90°
7 Washer
8 Straight Pin
9 Hub
10 Oil Pan
OM600 ENGINE MECHANICAL 1B3-75
Sectional View
3 Socket Bolt
4 Crankshaft Belt Pulley
5 Vibration Damper
6 Bolt
7 Washer
8 Straight Pin
Notice
The mounting position of vibration damper is fixed by straight
pin (8).
Tools Required
602 589 00 40 00 Engine Lock
103 589 00 30 00 Puller
9 Hub
11 Radial Seal
12 Timing Gear Case Cover
13 Key
14 Crankshaft Sprocket
16 Crankshaft
1B3-76 OM600 ENGINE MECHANICAL
Removal Procedure
1. Remove the starter motor and install the engine lock into
the wheel ring gear.
Engine Lock 602 589 00 40 00
2. Remove the poly V-belt.
3. Remove the cooling fan.
Notice
Keep the fan in vertical position.
4. Remove the cooling fan belt pulley (2).
5. Place alignment marks (arrow) on the vibration damper (5)
and crankshaft belt pulley (4).
6. Remove the timing sensor bracket.
Notice
Remove if necessary.
OM600 ENGINE MECHANICAL 1B3-77
7. Remove the socket bolts (3) and then remove the belt
pulley (4) and vibration damper (5).
8. Remove the washer and bolt.
9. Remove the hub by using a puller.
Puller 103 589 00 33 00
10. Replace the radial seal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст