SsangYong Musso. Manual — part 446
POWER BOOSTER 4C-5
PEDAL STROKE INSPECTION
1. Start the engine and stop it after one or two minutes.
Depress the brake pedal several times.
If the pedal goes down furthest the first time, but gradually
rises after the second or third time, brake booster is normal.
If there is no change in pedal stroke, the brake booster is
abnormal.
2. Depress the brake pedal several times with engine stopped,
and depress the brake pedal and start the engine. If the
pedal goes down slightly, the booster is normal.
3. Depress the brake pedal with engine running, and stop it
with the pedal depressed. If there is no change in pedal
height during 30 sec., the booster is normal.
SECTION 4D
FRONT DISC BRAKES
TABLE OF CONTENTS
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 4D-1
Fastener Tightening Specifications . . . . . . . . . 4D-1
Maintenance and Repair . . . . . . . . . . . . . . . 4D-2
On-Vehicle Service . . . . . . . . . . . . . . . . . . . . . 4D-2
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Application
Caliper Mounting Bolt
Brake Hose Bolt & Nut
Caliper Bolt
N
•••••
m
85 - 105
25 - 35
22 - 34
Front Disc Brake . . . . . . . . . . . . . . . . . . . . . . . 4D-2
Unit Repair . . . . . . . . . . . . . . . . . . . . . . . . . . 4D-5
Front Disc Brake . . . . . . . . . . . . . . . . . . . . . . . 4D-5
4D-2 FRONT DISC BRAKES
1 Eye-Hose Bolt . . . . . . . . . .. 25-35 Nm
2 Gasket . . . . . . . . . . . . ... Replace
3 Brake Hose
4 Brake Caliper
5 Bolt . . . . . . . . . . . . . . ... 20 Nm
6 Washer
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
FRONT DISC BRAKE
Preceding Work : Removal of wheels and tires
7 Front Disc Assembly
8 Brake Pad
9 Brake Hose and Nut . . . . . . . . 25-35 Nm
10 Gasket . . . . . . . . . . . . ... Replace
11 Washer
12 Bolt . . . . . . . . . . . . . 85-105 Nm
FRONT DISC BRAKES 4D-3
Removal & Installation Procedure
1. MANDO Brake
Tightening Torque
25 - 35 Nm
2. PBR Brake
Remove the eye-hose bolt and disconnect the hose.
Installation Notice
Tightening Torque
15 - 18 Nm
3. Remove the wheel speed sensor (for ABS vehicies).
Installation Notice
Tightening Torque
6 - 8 Nm
4. Remove the mounting bolts and then caliper assembly.
Installation Notice
Tightening Torque
85 - 105 Nm
Remove the hose mounting nut and disconnect the hose.
Installation Notice
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст