SsangYong Musso. Manual — part 395
1B3-142 OM600 ENGINE MECHANICAL
4. Install the camshaft bearing caps according to markings(1,
2, 3 etc.).
7. Remove the camshaft bearing cap.
8. Pull off the camshaft.
Notice
Be careful not to miss front locking washer.
9. Pull out the locking washer.
Notice
Check the condition of locking washer and replace if
necessary.
Installation Procedure
1. Insert the locking washer.
2. Check the valve tappet and ensure that tappet moves
smoothly.
3. Coat the camshaft with oil and install the camshaft onto the
cylinder head so that the TDC marking (arrow) is positioned
upward vertically.
OM600 ENGINE MECHANICAL 1B3-143
5. Tighten the camshaft bearing cap bolts acccording to
installation order.
6. Install the camshaft sprocket to be aligned the markings of
the camshaft / camshaft bearing cap (arrow).
Notice
Align the alignment marks on the timing chain and sprocket.
Tightening Torque
25 Nm
Notice
Tighten the No. 1 bolts (light arrow) by one revolution in
stages first and then tighten the No.2 bolts (dark arrow).
OM 661LA
OM 662LA
7. Tighten the camshaft sprocket bolt.
Tightening Torque
25Nm + 90°
1B3-144 OM600 ENGINE MECHANICAL
10. Check the TDC marking of OT on the crankshaft.
8. Install the chain tensioner.
Tightening Torque
80 Nm
Notice
Replace the seal.
Before installation, by pumping in the oil approx. 10 times,
fill the oil.
9. Remove the engine lock.
Notice
If max. length ‘L’ of the 12-sided bolt exceeds 53.6mm,
replace it.
OM600 ENGINE MECHANICAL 1B3-145
CHAIN TENSIONER
1 Chain Tensioner . . . . . . . . . . 80Nm
2 Seal . . . . . . . . . . . . . ... Replace
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст