SsangYong Korando III (2010 year). Manual — part 176
05-39
8010-01
Function
Signal
Remark
Display type
3 digits LCD
Display range
0.0 km ~ 99.9 km
(0 miles~99.9 miles)
Resolution
0.1 km (mile)
Display interval
every 10 seconds
Data clear
- Disconnect B+
voltage
- Press and hold Reset
switch for more than
1 sec.
- Reset automatically
when refilling
(2) Average Fuel Consumption Mode
The LCD display indicates average fuel consumption calculated based on total driving distance and total
fuel consumption since B+ power supply or data reset.
(3) Instant Fuel Consumption Mode
The LCD display indicates the instant fuel consumption (for 2 seconds) calculated based on driving
distance and fuel consumption for last 2 seconds.
Function
Signal
Remark
Display type
3 digits LCD
Display range
0.0 ~ 99.9
(MPG, ℓ/100 km, km/ℓ)
Resolution
0.1 km (mile)
Display interval
every 2 seconds
<STD>
<SVC>
<STD>
05-40
When the ignition is switched on and the vehicle is drived more than 10 km, average fuel consumption
is displayed at every 200 ms, based on the fuel consumption and driving distance for 600 ms.
-
Function
Signal
Remark
Display type
DOT BAR TYPE(92DOT)
Display range
0.0 ~ 20(ℓ/100km, km/ℓ)/ 0.0 ~ 50(MPG)
Resolution
(DOT)
0.2174(ℓ/100km, km/ℓ per Bar),
0.5435(MPG per Bar)
Display interval
every 200ms(25℃)
<SVC>
05-41
8010-01
SVC class instrument cluster
STD class instrument cluster
(4) Illumination Mode
(5) Ambient Air Temperature Mode
The ambient air temperature is calculated and displayed.
This is displayed on both STD and SVC class, regardless of FATC type (automatic or manual).
For SVC class, the driver set only the unit between ℃ and ℉ on the DOT LCD, the ambient
temperature is displayed on the SEG LCD.
-
-
-
Function
Signal
Remark
Display type
3 digits LCD
Display range
Resolution
1℃(1℉)
TRIP/RESET switch
▶
Press for less than 1 second: change to next mode
Press for more than 1 second:
: Enter into illumination level mode
→ Level changes by 1 step up and down when pressing the switch for more than
1 second on consecutively illumination mode
(e.g. Level 4 → 5 → 6 → 5 → 4 → 3 → 2 → 1)
If the Trip/Reset switch is not pressed within 3 seconds after getting into the illumination mode, the
LCD changes to next mode.
-
-
-
-30℃ ~ 90℃
(-22℉~ 194℉)
-31℃ ~ -33℃
: maintain 30℃
91℃~93℃
: maintain 90℃
-
-
-
<STD>
<SVC>
<STD>
<SVC>
05-42
9) Buzzer
Specifications
▶
Function
Signal
Part name
PKM17EPP-2002-B0 (MURATA, Piezoelectric Sound Components)
Permitted input voltage
25 VP-P or less
Operating temperature
-20˚C to +70˚C
Storage temperature
-30˚C to +80˚C
Sound pressure level
70 dB/min (3 Vp-p, 2 kHz, square wave, 10 cm)
Capacitance
10.9 nF ±30% (120 Hz)
Output
▶
Pin No.
Middle East
(STD only)
Except Middle
East
Buzzer
Priority
ON_Time
OFF_Time
PAS
O
O
-
-
0
Over speed
warning
O
X
500 ms
200 ms
1
ESP
O
O
100 ms
100 ms
2
Temperature
warning
O
O
500 ms
500 ms
3
Fuel filter
O
O
500 ms
500 ms
4
Parking
brake
O
O
2.8 s
1.5 s
5
Modulating frequency: 1.96 kHz
If the signal with higher priority is activated during the operation of signal with lower priority, the
current operation should be completed before starting the operation with higher priority.
If there are multiple signals at a time, the operation should be completed by the priority.
-
-
-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст